 Keep warping rotors, im really frustrated!, Getting warped for the 3rd time |
 Jun 4, 2006 - 6:58 AM
|
 
|
|
Enthusiast  Joined Dec 28, '05 From Norway Currently Offline Reputation: 0 (0%)  |
Ok, so having replaced my front discs for the third time I can notice that the rotors is being warped again. I have only driven 250 miles with my new set and I can now feel that they (or maybe just one of them) are slightly warped. I replaced the new discs with OEM toyota discs and EBC greenstuff pads. I have noticed that the right disc is much warmer that the left one. Ok, so I thought that the caliper is stuck somehow. I have overhauled all four calipers about 6 months ago. Today I took out the caliper and both sylinders, all seems fine and the slide without any prob. I can push them into the caliper body with just my fingers! I tried a testrun without no braking at all and I can say for sure that the right disk are warm (let's say about 115F), so the caliper are not retreating fully? Not working 100%? I have no more ideas, I really hope someone can help me. I am getting really frustrated
 Edit: Oh, I've been really careful when braking. This post has been edited by eliaz: Jun 4, 2006 - 7:01 AM --------------------  |
 |
Replies
|
Jun 13, 2006 - 5:45 PM
|
|
 Enthusiast Joined Apr 19, '06 From Long Island, NY Currently Offline Reputation: 13 (100%) |
If you go with aftermarket brake lines please let me know which product you choose. Thanks.
-------------------- '92 Grey Mitsubishi 3000GT SL - Sold
'96 Black Celica ST 25th Anniversary - Sold '99 Black Mitsubishi 3000GT VR-4 - Sold '04 E250 Work Van - Going soon '08 Grey Dodge Charger Work Car - Ordered |
Posts in this topic
eliaz Keep warping rotors, im really frustrated! Jun 4, 2006 - 6:58 AM
vsideboy make sure the hub is entirely flat and clean when ... Jun 4, 2006 - 10:22 AM Bitter are your wheels torqued to the correct specs with ... Jun 4, 2006 - 10:39 AM eliaz I've cleaned the hub before installing the new... Jun 4, 2006 - 11:55 AM LewFX sounds like you got a bad wheel bearing causing th... Jun 4, 2006 - 12:46 PM eliaz How come the disc getting warm? Jun 4, 2006 - 1:50 PM celica101 Dude check your brake hoses, mine did the same thi... Jun 4, 2006 - 2:06 PM eliaz QUOTEDude check your brake hoses, mine did the sam... Jun 4, 2006 - 2:45 PM LewFX seems like a seized up or (locked) hub and bearing... Jun 4, 2006 - 4:30 PM eliaz Bleed them about a week ago when I checked the cal... Jun 4, 2006 - 4:39 PM soulshadow Stop drinking too much and quit dopping ! (im... Jun 4, 2006 - 5:51 PM celica101 yeah just the wheel well to the caliper Jun 4, 2006 - 8:38 PM purplegt4 QUOTE(soulshadow @ Jun 4, 2006 - 6:5... Jun 4, 2006 - 9:04 PM vsideboy I wouldn't step on them hard, I would just dri... Jun 5, 2006 - 2:05 AM eliaz QUOTEAll brakes and rotors will eventually become ... Jun 5, 2006 - 3:26 AM SinisterWhisper I can't say I am having all that much luck wit... Jun 5, 2006 - 9:19 AM eliaz Did you put copper grease on back of the pads? Hel... Jun 6, 2006 - 9:58 AM eliaz So I called Toyota today and they said they had so... Jun 8, 2006 - 11:15 AM bindertch Go performance. You know you want to. Also If you ... Jun 10, 2006 - 10:34 PM eliaz Okay, I have talked to a couple mechanics and they... Jun 18, 2006 - 3:35 AM LewFX sounds like i was right about the hub and bearing.... Jun 18, 2006 - 8:43 AM eliaz QUOTEmr. suspension knows allot Lol!
Is i... Jun 19, 2006 - 10:10 AM LewFX most dealerships wont sell just a bearing without ... Jun 19, 2006 - 3:35 PM Bitter you can get timken bearings from autozone. thats ... Jun 19, 2006 - 4:29 PM eliaz Did the pencil trick on the rotor and hub, look wh... Jun 20, 2006 - 11:50 AM playr158 if you keep warping rotors....are you sure your no... Jun 20, 2006 - 11:58 AM LewFX looks almost like mine before i got it fixed, trim... Jun 20, 2006 - 12:57 PM eliaz QUOTEdid you do a happy dance?
Not yet, I have to... Jun 20, 2006 - 1:02 PM cheeco one other quick check you can do is check pedal fr... Jun 20, 2006 - 8:02 PM soulshadow have u checked to make sure that your Rims are not... Jun 20, 2006 - 11:31 PM eliaz Rims not bent. I haven't checked the pedal fre... Jun 21, 2006 - 11:10 AM eliaz So today I have been really pissed of since i pick... Jun 30, 2006 - 3:39 PM WannabeGT4 If they broke your ABS sensor make them pay for it... Jun 30, 2006 - 3:53 PM eliaz They are not paying for it, they said that they ha... Jul 1, 2006 - 3:45 AM
cheeco QUOTE(eliaz @ Jul 1, 2006 - 3:45 AM)... Jul 2, 2006 - 7:23 AM LewFX the only thing with nooopi is their shipping is re... Jul 1, 2006 - 9:59 AM LewFX you always get them trimmed, find the cheapest pla... Jul 1, 2006 - 10:13 AM vsideboy I agree, if they broke it they pay! Jul 3, 2006 - 4:40 AM LewFX show them the removal process from a manual and ar... Jul 3, 2006 - 9:07 AM |
10 User(s) are reading this topic (10 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 12:55 PM |