7AGTE dyno date set, now with dyno sheet! Options

[nik]

i called the shop yesterday who in turn called the dyno shop and set up an appt. but there 2 weeks out so its set for the 18th so it will get tuned and dynoed then and i'll post videos and graphs

[97lestyousay]

I love the build, it is sick. Be careful with the boost.
I think the flywheel and the mains, might become a
concern later. I am not so familar with 7A lower end
but, Chevy didn't make a 4 bolt on high HP motors for
nothing. Great #s man.

[celicasteve]

I love the build, it is sick. Be careful with the boost.
I think the flywheel and the mains, might become a
concern later. I am not so familar with 7A lower end
but, Chevy didn't make a 4 bolt on high HP motors for
nothing. Great #s man.

Sheby didn't make a good engine either...we have a stock short block mopar 360 with cast crank, 2 bolt mains, stock rods and pistons..running mid 10's in a 3100# car with 10.5 slicks with leaf springs (all motor) and all.....sheby..hahaha,,and phord!!! don't even start!

Great numbers man!!! Toyotas and mopars kick everyone elses asses...for stock parts, both overlybuilt.

Steve

[nik]

i sent a copy of my chart to pressure hopefully he can post it



first run

max power= 265.34 max torque = 375.06 @ 12 psi untuned

last run

max power= 311.54 max torque = 305.94 @ 17 psi tuned

This post has been edited by nik: Jun 14, 2006 - 2:28 PM