Switched 95 bumper to 96 bumper |
Switched 95 bumper to 96 bumper |
Jun 14, 2006 - 4:34 PM |
|
Enthusiast Joined Dec 21, '05 From Ontario Currently Offline Reputation: 1 (100%) |
So my clear turns came in the mail yesterday so I thought I would get them on right away, so I had to switch my bumper. After a few hours (mostly because all the bolts were rusted on) I was finally able to switch the bumpers with the help of a friend of course. Here's what it looks like now...
The only problem I had was that 1 of the 3 bolts on the drive side broke. It was the plate with the bolts on it that connects to the fender .. there is a small gap that is somewhat noticeable. It was the bottom bolt that broke (would that deter the strength of the bumper?) .. should I replace it .. if you guys think i should, does anyone have the part number for it? Driver side (gap) Passenger side (no-gap) |
Jun 14, 2006 - 6:30 PM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
The new bumper I think is only nice is you get the fogs, ss-III splitters, and the ss-III grill. the older one is nice is you just have the fogs, and the 94-95 splitters, gotta love the bigger opening.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Lo-Fi Version | Time is now: December 1st, 2024 - 3:56 AM |