Vaccum Issues with swap, diagrams i have are bogus. Options

[jcbass7]

So i have the engine about to drop, but now with the wiring almost out of the way i have some vacuum issues to figure out.. and the diagrams i have are completly useless.

I have three vacuum lines that i am unsure of right now. Two come out of the top of the intake manifold and proceed across the sticker that says toyota... well here is a pic instead:




and the other comes out on the passenger side of the intake manifold near the throttle body heres a pic:


and another pic



it is the one on the left of the two, (the one with the black spiral cover thing)

thanks in advance

Jesse

This post has been edited by jcbass7: Jun 28, 2006 - 9:30 AM

[jcbass7]

ok, i'm going to hook up the charcoal canister and such for the chance i might pass emissions



is the map sensor mounted on the firewall? or under the intake manifold?

thanks guys

PS: the engine is a JDM 1993 all-trac

ohhhh yea in the second picture under where the intercoolel hooks in, there is a fitting hanging there made out of brass maybe or whatever, but i think its my throttle body warmer? well im not sure where to hook it its just dangling right now,

This post has been edited by jcbass7: Jun 28, 2006 - 3:46 PM