GB: 5sfe headers...PICS and VIDS ON PAGE 3, UPDATE ON LAST PAGE...you guys wanna start this up again? Options

[pimped6gen]

UPDATE ON THE LAST PAGE....

Hey guys I got it in! My car IS 100% completed. The header is a 4-1 design. The header is colored black and only requires modification to the length of the 02 sensors. Everything else bolts right up.

The pricing will be as follows--
1-9 people -215 shipped. Colored with black paint, and all gaskets
10-20 people -205 shipped. Colored with black paint, and all gaskets
I can do the whole system back to the cat, but just pm me if your intersted.

I got the header in, car runs great and pulls strong.

PICS and VIDS on page 3.

Send the money to jcamp13@comcast.net through paypal.
I would appreciate 3% added onto the final price, b/c once again, Im not making any money on this!
Thanks!

We'll end the name taking on Saturday July 15th
4-1 Header, All gaskets included
Only thing you'll need are 3 bolts,a spacer if needed, and wires to make your o2 sensors longer.
Any exhaust shop will be able to do this and should have the wire, and accesories on hand!

UPDATE ON THE LAST PAGE....

This post has been edited by pimped6gen: Sep 7, 2006 - 9:57 AM

[Batman722]

the other thing I have a problem with is 94 fed (non cali) GTs only have 1 02 sensor, all of the rest have 2. The front 02 sensor has the same fitting each year (flange) while 96+ has a bung fitting for it's rear 02 sensor.

I don't understand why but my car is a 95 but has 2 sensors as shown in the picture above. So, if someone could please post a picture of the 94-95 header I would appreciate it... Just to make sure that the 94-95’s only has one sensor.

maybe I should of been clearer, so here it goes... only the 94 non-cali (federal emission) GTs have 1 02 sensor. All other USDM GT Celicas 94-99 have 2 02 sensors.

Now to explain the difference between the 02 sensors in the 94-95 and the 96+

the flanges of the 94-95 both (front and rear) look like this one pictured - one is in the exhaust manifold and the second is in the primary cat (not pictured)



for the 96-99 and the top (front) sensor has this (same as the 94-95 guys)



but the bottom (rear) looks like this



for example, look at this picture again from LewFX of his header for his 99 GT



^^^^ that header pictured will bolt up to any 94-99 GT but the lower 02 bung will have to be changed to the correct flange to fit the 94-95 02 sensor

I'm not trying to be a jerk, I just need to make sure you have the correct information

This post has been edited by Batman722: Jun 28, 2006 - 11:54 PM