Where to mount some things?, I need some input... Options

[Bitter]

So I have a wideband (aem uego, 6 in 1) on the way and a Safc2 coming soon, while I have an idea of where I'll put the wideband....I havent the faintest idea of where to put the Safc2!



the red reprsents my choice of mounting location for the wideband. its in my feild of veiw without being too distracting and it stays below the topline of the dash so theres no legal problems.


but what about the Safc2? one thought is with the bracket below the radio in the change cup, but i'm sort of fond of a dish for odds and ends.

another though is in the glovebox or the armrest cubby, but i think visible is good since i'm new to using this.

someone else suggested above the center vents, but that just screams STEAL MEE!!!

and finally molding it into the space below the radio. i NEVER use the cupholder in there at all, but i'm not sure if i have the vertical room to do that.

[MaX]

if you say the whine stops when you run both power and ground from the engine bay, then do it that way, just wire it up so it turns on with your clock or whenever the ignition is on.

if that's a bit tricky, you could even put it on a switch, but that means you gotta turn it on and off all the time...


good luck, and as for the SAFC, i have no idea, my best shot would be under the head unit.