Indiglo Install, I read everything, but still have one slight Q |
Indiglo Install, I read everything, but still have one slight Q |
Jul 12, 2006 - 9:16 PM |
|
Enthusiast Joined Mar 28, '06 From Brooklyn, New York Currently Offline Reputation: 1 (100%) |
Alright, any advice on how to remove the black plastic cover above the needle. How to safetly remove it?
Where should I tap my power from? Is there another good place to tap power from What color is the parking light fuse? Thanks in advance Leon |
Jul 12, 2006 - 9:24 PM |
|
Enthusiast Joined May 25, '06 From South Carolina Currently Offline Reputation: 3 (100%) |
i did this, im not sure what cover u talkin about, the ones i installed slipped over the old ones, and its a tricky deal.
fuse wise, i cant explain ATM which one u need to run through, tommorow i will have a look. u need to get your power from that fuse, best way right now is take volt meter, turn your head lights on, and unplug (i think its the top left fuse) whichever one has a full 12 volts, but the tricky part is u want the power to go thru the fuse, so put the power wire in the 1 hole out of the 2 holes from the fuse that dosent have the power.... ha...ill check tommorow and give u a better how to. -------------------- |
Lo-Fi Version | Time is now: December 3rd, 2024 - 2:52 PM |