6G Celicas Forums

Welcome Guest ( Log In | Register )

> Not getting fuel 3sgte, Getting fuel to filter, no error codes, no fuel on spark plugs, not st
post Jul 10, 2006 - 8:51 AM
+Quote Post
jcbass7



Enthusiast
*****
Joined Apr 20, '06
From Florida
Currently Offline

Reputation: 44 (100%)




The car is ready to run etc. but the problem i am having now is that the fuel pump is not running. I am pretty sure its not the fuel pump with the issue, and ive used a voltmeter to test the lines going to it and they are not bringing power.

Is a relay out possibly? i know the fuel pump needs certian things in the car to work for it to run..

I jumped the +B and Fp terminals and then put the car in the ON position and still no power to the pump


any ideas?

This post has been edited by jcbass7: Jul 22, 2006 - 7:23 PM
 
Start new topic
Replies
post Jul 14, 2006 - 5:02 PM
+Quote Post
jcbass7



Enthusiast
*****
Joined Apr 20, '06
From Florida
Currently Offline

Reputation: 44 (100%)




ok

1. the check engine light is not on. and does not come on at all when keys are in

2. cheked fuse connections and interior connections they appear fine

3. there IS power at the bk-yellow wire ad the bottom of the fuse box (there were two a big and a small but getting 12 volt on both)

4. there IS power to the bk-orange wire at BOTH the coil and ignitor




the only things i know that aren't set yet, are the vac hoses to the EGR that came from the 5sfe, and the large ground behind the intake manifold



oh yes thank you soooo much Tweak, Manny, Lagos and everyone else for helping me so far through this swap, trust me i'm learning a lot and don't know where i would be without 6gc smile.gif

This post has been edited by jcbass7: Jul 14, 2006 - 5:03 PM

Posts in this topic
- jcbass7   Not getting fuel 3sgte   Jul 10, 2006 - 8:51 AM
- - presure2   who did your harness? check the fueses first, make...   Jul 10, 2006 - 9:03 AM
|- - jcbass7   QUOTE(presure2 @ Jul 10, 2006 - 9:03...   Jul 10, 2006 - 9:10 AM
- - lagos   they should be next to your ecu. black one is COR,...   Jul 10, 2006 - 11:35 AM
- - jcbass7   alright ill check the harness to make sure its all...   Jul 10, 2006 - 4:04 PM
- - lagos   QUOTE(jcbass7 @ Jul 10, 2006 - 5:04 ...   Jul 10, 2006 - 4:31 PM
- - jcbass7   yea i haven't been able to reach him for the l...   Jul 10, 2006 - 4:52 PM
- - Dr_Tweak   You didn't tell me you were having a fuel prob...   Jul 12, 2006 - 6:55 AM
|- - jcbass7   QUOTE(Dr_Tweak @ Jul 12, 2006 - 6:55...   Jul 13, 2006 - 12:11 PM
- - jcbass7   ok i charged the batt and i am not getting any pow...   Jul 14, 2006 - 9:11 AM
- - lagos   your COR is probably not wired up right   Jul 14, 2006 - 11:06 AM
- - Dr_Tweak   When you turn the key to the on position, does you...   Jul 14, 2006 - 11:39 AM
|- - jcbass7   QUOTE(Dr_Tweak @ Jul 14, 2006 - 11:3...   Jul 14, 2006 - 4:42 PM
- - Dr_Tweak   Don't worry about that right now, it probably ...   Jul 14, 2006 - 4:49 PM
- - jcbass7   ok 1. the check engine light is not on. and does ...   Jul 14, 2006 - 5:02 PM
|- - Dr_Tweak   QUOTE(jcbass7 @ Jul 14, 2006 - 10:02...   Jul 15, 2006 - 7:31 AM
|- - jcbass7   QUOTE(Dr_Tweak @ Jul 15, 2006 - 7:31...   Jul 16, 2006 - 12:28 PM
- - lagos   QUOTEthe large ground behind the intake manifold ...   Jul 14, 2006 - 5:28 PM
|- - jcbass7   QUOTE(lagos @ Jul 14, 2006 - 5:28 PM...   Jul 14, 2006 - 5:30 PM
- - lagos   there is a ground wire on the back of the motor. i...   Jul 14, 2006 - 5:35 PM
- - jcbass7   shall do good thing the axles aren't in yet gi...   Jul 14, 2006 - 5:37 PM
|- - phattyduck   QUOTE(jcbass7 @ Jul 14, 2006 - 3:37 ...   Jul 14, 2006 - 6:07 PM
- - jcbass7   damn im stupid, alright i have them all hooked up ...   Jul 14, 2006 - 6:16 PM
- - jcbass7   you say it goes to the second runner correct? wel...   Jul 14, 2006 - 6:54 PM
- - Dr_Tweak   Just make sure that ground is bolted to the manifo...   Jul 14, 2006 - 8:48 PM
- - jcbass7   She is bolted on and grounded. still no power to...   Jul 14, 2006 - 10:15 PM
- - lagos   what is the car doing... does the starter even cra...   Jul 14, 2006 - 10:22 PM
- - jcbass7   oh yes the starter cranks fine, my step dad spraye...   Jul 14, 2006 - 10:37 PM
- - lagos   but, you also said that your diagnostic (cel, oil....   Jul 14, 2006 - 10:46 PM
- - jcbass7   its an sw20 pump, and yes i am not getting a che...   Jul 14, 2006 - 10:47 PM
- - lagos   from your battery... you have a ground wire connec...   Jul 14, 2006 - 10:50 PM
- - K-ESD   You're not getting pwr from the EFI relay pull...   Jul 15, 2006 - 12:16 AM
- - jcbass7   ok ny meet is today so ill test all of this tommor...   Jul 15, 2006 - 6:21 AM
- - K-ESD   actualy, i made things a lil more complicated than...   Jul 15, 2006 - 7:18 AM
- - jcbass7   also i tried Art's suggestion with jumping bat...   Jul 16, 2006 - 12:50 PM
- - K-ESD   have you tried what I suggested? cause from your ...   Jul 16, 2006 - 4:04 PM
- - Dr_Tweak   K-ESD is correct, there's nothing wrong with t...   Jul 16, 2006 - 4:29 PM
- - jcbass7   yes i understand that the problem is not the fuel ...   Jul 16, 2006 - 8:01 PM
- - jcbass7   EDIT: I just went out to double check the pink wi...   Jul 16, 2006 - 8:17 PM
|- - Dr_Tweak   QUOTE(jcbass7 @ Jul 17, 2006 - 1:17 ...   Jul 16, 2006 - 8:24 PM
- - K-ESD   you're getting closer relay works so you can m...   Jul 16, 2006 - 8:58 PM
- - jcbass7   i'm going to have to buy more fuses and test i...   Jul 16, 2006 - 11:00 PM
- - jcbass7   ok here is the update... the 15amp fuse blows eve...   Jul 17, 2006 - 8:34 AM
- - jcbass7   OK with tweaks help i have made progress (for anyo...   Jul 17, 2006 - 6:17 PM
- - Dr_Tweak   Hmm this is odd. Yes, code 14 will cause the engi...   Jul 17, 2006 - 7:55 PM
|- - jcbass7   I'm going to have to draw a diagram of this.. ...   Jul 18, 2006 - 10:44 AM
- - lagos   check your harness plug that goes to the ignitor. ...   Jul 17, 2006 - 8:03 PM
|- - phattyduck   QUOTE(lagos @ Jul 17, 2006 - 6:03 PM...   Jul 17, 2006 - 8:33 PM
||- - jcbass7   QUOTE(phattyduck @ Jul 17, 2006 - 8...   Jul 17, 2006 - 9:25 PM
|- - jcbass7   QUOTE(lagos @ Jul 17, 2006 - 8:03 PM...   Jul 18, 2006 - 10:54 AM
- - WannabeGT4   Your ECU is definitely form a 92-93 celica. Looki...   Jul 18, 2006 - 1:52 PM
- - jcbass7   correct i did not buy a clip (mistake) but i actua...   Jul 18, 2006 - 2:14 PM
|- - WannabeGT4   QUOTE(jcbass7 @ Jul 18, 2006 - 2:14 ...   Jul 18, 2006 - 3:06 PM
- - Dr_Tweak   Okay, ECU is correct, the are you sure that the 16...   Jul 18, 2006 - 2:28 PM
- - jcbass7   how about the 26 pin... should that have pins in ...   Jul 18, 2006 - 10:31 PM
- - jcbass7   Ok this diagram shows EXACTLY what my wiring looks...   Jul 19, 2006 - 1:31 PM
- - Dr_Tweak   Okay well the THW is an odd one, there must be a b...   Jul 19, 2006 - 4:05 PM
- - jcbass7   ok so this is a bit weird i thought i might che...   Jul 19, 2006 - 5:58 PM
- - jcbass7   ok well im almost positive code 12 is because the ...   Jul 19, 2006 - 6:06 PM
|- - Dr_Tweak   QUOTE(jcbass7 @ Jul 19, 2006 - 11:06...   Jul 19, 2006 - 6:51 PM
- - jcbass7   Ok well i cleared the codes and 12 went away now i...   Jul 20, 2006 - 9:06 AM
|- - phattyduck   QUOTE(jcbass7 @ Jul 20, 2006 - 7:06 ...   Jul 20, 2006 - 3:33 PM
|- - jcbass7   QUOTE(phattyduck @ Jul 20, 2006 - 3...   Jul 20, 2006 - 4:39 PM
- - Dr_Tweak   Okay so now it's cranking, but you have no sta...   Jul 20, 2006 - 4:47 PM
|- - jcbass7   QUOTE(Dr_Tweak @ Jul 20, 2006 - 4:47...   Jul 20, 2006 - 4:50 PM
- - jcbass7   ok ran a new wire and still getting code 22 (clear...   Jul 20, 2006 - 4:59 PM
- - Dr_Tweak   Is it plugged in? Does the brown wire have continu...   Jul 20, 2006 - 5:06 PM
- - jcbass7   ill check, brb one sec ok im not incredibly sure ...   Jul 20, 2006 - 5:10 PM
- - Dr_Tweak   Run a wire from the brown wire to a good ground an...   Jul 20, 2006 - 5:12 PM
- - jcbass7   ok i ran the ground, and now after clearing the co...   Jul 20, 2006 - 5:24 PM
- - Dr_Tweak   Okay, DO you have spark?   Jul 20, 2006 - 5:28 PM
- - jcbass7   Yes i do, i even got shocked checking it. I teste...   Jul 20, 2006 - 5:46 PM
- - Dr_Tweak   No, should be fine. Is your fuel pump running when...   Jul 20, 2006 - 5:51 PM
- - jcbass7   ok i beleive the wires are in the right order, 1...   Jul 22, 2006 - 6:32 PM
- - jcbass7   ok i AM getting fuel at the top of the fuel filter...   Jul 22, 2006 - 6:48 PM
- - jcbass7   ok so i ran the codes for the fun of it... now i...   Jul 22, 2006 - 7:15 PM
- - lagos   QUOTEok i beleive the wires are in the right order...   Jul 22, 2006 - 8:44 PM
|- - jcbass7   QUOTE(lagos @ Jul 22, 2006 - 8:44 PM...   Jul 22, 2006 - 8:53 PM
- - lagos   do you have your fuel injector resistor pack hooke...   Jul 22, 2006 - 10:20 PM
|- - jcbass7   QUOTE(lagos @ Jul 22, 2006 - 10:20 P...   Jul 23, 2006 - 8:24 AM
- - K-ESD   QUOTE(jcbass7 @ Jul 23, 2006 - 10:24...   Jul 23, 2006 - 8:39 AM
- - jcbass7   anywhere special? i have barely any slack on the c...   Jul 23, 2006 - 9:03 AM
|- - presure2   QUOTE(jcbass7 @ Jul 23, 2006 - 10:03...   Jul 23, 2006 - 9:55 AM
- - jcbass7   ok thats bolted down as well as the coil pack, now...   Jul 23, 2006 - 9:24 AM
- - jcbass7   is there a way i can test the injectors to see if ...   Jul 23, 2006 - 9:34 AM
- - jcbass7   currently a work in progress manny i moved the...   Jul 23, 2006 - 10:00 AM
- - lagos   QUOTEis there a way i can test these to see if the...   Jul 23, 2006 - 11:56 AM
- - phattyduck   Sounds like you also should check for power at the...   Jul 24, 2006 - 3:49 AM
- - jcbass7   You sure they need 12v with the key to the ON posi...   Jul 24, 2006 - 1:38 PM
- - jcbass7   ok i am getting no voltage on tkhe injectors when ...   Jul 25, 2006 - 8:36 AM
- - phattyduck   QUOTE(jcbass7 @ Jul 25, 2006 - 6:36 ...   Jul 25, 2006 - 12:50 PM


Reply to this topicStart new topic
45 User(s) are reading this topic (45 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 24th, 2025 - 11:26 AM