How to make AC work with your swap, aka: Need help with AC wiring thread Options

[lagos]

ok... so my AC hasnt worked since the swap and i figure now is a good time to wire that crap up. so i have my harness apart and im trying to look at the wiring diagrams to figure out a few things. seems like i need some help.

"ac amplifier" in the diagrams means the main AC compressor, correct?

on it, is a plug called A8 (looking at the 5sfe diagrams). the harness goes from there to a plug called IM1 and then 3 wires go to the ECU's 1st plug. where is IM1 located ? is it the white, 5 wire plug that goes from the 3s hanress, and plugs in right behind the glove box?

This post has been edited by lagos: Jul 29, 2006 - 9:02 PM

[lagos]

i finally found my wiring book. IM1 seems to be the correct plug that i was looking for.

dustin corrected me by telling me the AC amplifier is a large unit behind the glove box and not the main ac compressor that bolts to the motor.

after looking around some more... i belive the AC compressor is labled as "A/C magnetic clutch". and it the harness plug on it is called A2. can anyone verify this?