How to make AC work with your swap, aka: Need help with AC wiring thread Options

[lagos]

ok... so my AC hasnt worked since the swap and i figure now is a good time to wire that crap up. so i have my harness apart and im trying to look at the wiring diagrams to figure out a few things. seems like i need some help.

"ac amplifier" in the diagrams means the main AC compressor, correct?

on it, is a plug called A8 (looking at the 5sfe diagrams). the harness goes from there to a plug called IM1 and then 3 wires go to the ECU's 1st plug. where is IM1 located ? is it the white, 5 wire plug that goes from the 3s hanress, and plugs in right behind the glove box?

This post has been edited by lagos: Jul 29, 2006 - 9:02 PM

[MaskedMan]

oh sorry i forgot to put where the 4th pin of the A/C thermistor A26 goes. its a green-red wire that leads to connecter IJ1 pin 6 (18 pin connector) then leads to Connector IQ3 pin 3 (8 pin connector) and then it leads to pin 19 of A34 (auto a/c amplifier)

As for what those wires do exactly... ill have to find that out. all i know is that the both the white-blue wire and the white-red wire should have continuity with a/c switch (a/c control assembly) on and ignition sw at on position. I will see what else i can find out.