Completed Engine Swaps., who's got em. add your name and info. ;) Options

[Mynzeyes]

just like the topic says, i think this would be a very good little thread, just to give some insight for the newbs and dreamers as to what the swappers have done, what they went through, and how it's workin out to this day. feel free to add any info you wish, mainly the car type before, the new motor type, info about your personal swap (as all swaps are NOT created equal), a time frame, general cost, how is the performance, are you happy w/ it, etc... . let's see how big this list can get. .

-John-

edit: btw, only post if you are DONE and driving the car. that's what i'm lookin for.

[puretone]

hey guys, i have been looing up and down on the net to find any sort of info on a particular part of this following swap:

1998 3SGE BEAMS into a 1992 Celica GT

it all works (usefull hint: use original driveshafts because the BEAMS shafts are longer by an inch on both sides, other than that all matches up), got it started on pretty much the first try, huge DUH at not connecting the battery first time.....
Anywho, i got the gauges cluster for the original BEAMS as it came with the clip, just the dash wiring harnass was missing......rather i never made sure to have it included. My question is, does any of you have any experience with an old mechanical Speedometer & Electric Tach to building in an entire Electrical Gauges Cluster, so say something like a ST184 to ST202/ST204 conversion cluster? im trying to find the dash wiring diagram to an ST202 to see if i can't find my bearings in this ocean.
Thanks!