can someione please help?, cant decide/dont know Options

[Celiracer18]

im trying to pickout a turbo for my 7afe and i found a couple choices that might work. im wondering which of the following 2 turbos would give me the most for my money and reliability

T3/T4 T04E turbo
around 200$
# 100% Brand New. Never been Tried or Installed.
# 3" inlet Diamenter /2"Outlet
# 0.58 5 Bolt Standard Hotside
# 0.63 A/R Cold
# 0.57 Cimpressor wheel trim
# 0.60 A/R Compressor
# 0.63 A/R Turbine
# 57 Trim
# Turbine Wheel: Exducer 2.48" / Mayor :2.89"
# Compressor Wheel : exducer :2.07" / Mayor 2.36"
# 25-35 PSI PEAK POWER PERFORMANCE OUTPUT CAPABILITY

Garret T3 super 60
400$
Turbine: .63 a/r, stage III wheel
Compressor: .60 a/r, "super 60" trim compressor
Oil cooled and lubricated, with a 360 degree thrust bearing!
2.5" compressor inlet, 2" compressor outlet
Standard Garrett T3 5 bolt turbine discharge pattern (the one that is most common).

From what ive read the super 60 is pretty much the best for a 7afe but yet its more expensive
im also wondering what kind of power I can push with these

[Celiracer18]

so i can run the super 60 with stock internals

or i can get the other one and run it with a built motor?

hmm not sure

the 200 less i spend on the t3/t4 is almost worth it if i have to rebuild
plus the t3/t4 comes in a kit with IC piping, wastegate, BOV, and B-series manifold---yes the kit is for a b16/18
the whole kit is only like 850$

after im done i wanna be running in the 14s

so basically which one would work for that?

This post has been edited by Celiracer18: Jul 19, 2006 - 5:16 PM