![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
ok... so my AC hasnt worked since the swap and i figure now is a good time to wire that crap up. so i have my harness apart and im trying to look at the wiring diagrams to figure out a few things. seems like i need some help.
"ac amplifier" in the diagrams means the main AC compressor, correct? on it, is a plug called A8 (looking at the 5sfe diagrams). the harness goes from there to a plug called IM1 and then 3 wires go to the ECU's 1st plug. where is IM1 located ? is it the white, 5 wire plug that goes from the 3s hanress, and plugs in right behind the glove box? This post has been edited by lagos: Jul 29, 2006 - 9:02 PM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
i did a little ghetto bleeding . fill the low side while venting the high side. it did the trick and now the AC blows ICE COLD ! its so great driving around in a turbo car will all the comforts of a daily driver.
does anyone know the exact PSI our system should be filled to? i did mine to about 35psi. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '03 From 캘리포니아 Currently Offline Reputation: 23 (100%) ![]() |
QUOTE(lagos @ Jul 21, 2006 - 7:01 PM) [snapback]459295[/snapback] does anyone know the exact PSI our system should be filled to? i did mine to about 35psi. The low side pressure should be 21-35psi, and the high side pressure should be 190-220psi. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 5:12 PM |