 Not getting fuel 3sgte, Getting fuel to filter, no error codes, no fuel on spark plugs, not st |
 Jul 10, 2006 - 8:51 AM
|
 
|
 Enthusiast  Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%)  |
The car is ready to run etc. but the problem i am having now is that the fuel pump is not running. I am pretty sure its not the fuel pump with the issue, and ive used a voltmeter to test the lines going to it and they are not bringing power.
Is a relay out possibly? i know the fuel pump needs certian things in the car to work for it to run.. I jumped the +B and Fp terminals and then put the car in the ON position and still no power to the pump any ideas? This post has been edited by jcbass7: Jul 22, 2006 - 7:23 PM |
 |
Replies
|
Jul 22, 2006 - 6:32 PM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
ok i beleive the wires are in the right order, 1-3-4-2?
but anywho, i cranked away for a little while and then pulled the plug that was accessable without moving the intercooler and it was dry as a desert. couldn't smell fuel or anything. When i put the key to on, i hear the fuel pump wine on etc. i'm going to crack the top of the fuel filter to see if fuel is getting there, what else should i do? |
Posts in this topic
jcbass7 Not getting fuel 3sgte Jul 10, 2006 - 8:51 AM
presure2 who did your harness?
check the fueses first, make... Jul 10, 2006 - 9:03 AM
jcbass7 QUOTE(presure2 @ Jul 10, 2006 - 9:03... Jul 10, 2006 - 9:10 AM lagos they should be next to your ecu. black one is COR,... Jul 10, 2006 - 11:35 AM jcbass7 alright ill check the harness to make sure its all... Jul 10, 2006 - 4:04 PM lagos QUOTE(jcbass7 @ Jul 10, 2006 - 5:04 ... Jul 10, 2006 - 4:31 PM jcbass7 yea i haven't been able to reach him for the l... Jul 10, 2006 - 4:52 PM Dr_Tweak You didn't tell me you were having a fuel prob... Jul 12, 2006 - 6:55 AM jcbass7 QUOTE(Dr_Tweak @ Jul 12, 2006 - 6:55... Jul 13, 2006 - 12:11 PM jcbass7 ok i charged the batt and i am not getting any pow... Jul 14, 2006 - 9:11 AM lagos your COR is probably not wired up right Jul 14, 2006 - 11:06 AM Dr_Tweak When you turn the key to the on position, does you... Jul 14, 2006 - 11:39 AM jcbass7 QUOTE(Dr_Tweak @ Jul 14, 2006 - 11:3... Jul 14, 2006 - 4:42 PM Dr_Tweak Don't worry about that right now, it probably ... Jul 14, 2006 - 4:49 PM jcbass7 ok
1. the check engine light is not on. and does ... Jul 14, 2006 - 5:02 PM Dr_Tweak QUOTE(jcbass7 @ Jul 14, 2006 - 10:02... Jul 15, 2006 - 7:31 AM jcbass7 QUOTE(Dr_Tweak @ Jul 15, 2006 - 7:31... Jul 16, 2006 - 12:28 PM lagos QUOTEthe large ground behind the intake manifold ... Jul 14, 2006 - 5:28 PM jcbass7 QUOTE(lagos @ Jul 14, 2006 - 5:28 PM... Jul 14, 2006 - 5:30 PM lagos there is a ground wire on the back of the motor. i... Jul 14, 2006 - 5:35 PM jcbass7 shall do good thing the axles aren't in yet gi... Jul 14, 2006 - 5:37 PM phattyduck QUOTE(jcbass7 @ Jul 14, 2006 - 3:37 ... Jul 14, 2006 - 6:07 PM jcbass7 damn im stupid, alright i have them all hooked up ... Jul 14, 2006 - 6:16 PM jcbass7 you say it goes to the second runner correct? wel... Jul 14, 2006 - 6:54 PM Dr_Tweak Just make sure that ground is bolted to the manifo... Jul 14, 2006 - 8:48 PM jcbass7 She is bolted on and grounded.
still no power to... Jul 14, 2006 - 10:15 PM lagos what is the car doing... does the starter even cra... Jul 14, 2006 - 10:22 PM jcbass7 oh yes the starter cranks fine, my step dad spraye... Jul 14, 2006 - 10:37 PM lagos but, you also said that your diagnostic (cel, oil.... Jul 14, 2006 - 10:46 PM jcbass7 its an sw20 pump,
and yes i am not getting a che... Jul 14, 2006 - 10:47 PM lagos from your battery... you have a ground wire connec... Jul 14, 2006 - 10:50 PM K-ESD You're not getting pwr from the EFI relay
pull... Jul 15, 2006 - 12:16 AM jcbass7 ok ny meet is today so ill test all of this tommor... Jul 15, 2006 - 6:21 AM K-ESD actualy, i made things a lil more complicated than... Jul 15, 2006 - 7:18 AM jcbass7 also i tried Art's suggestion with jumping bat... Jul 16, 2006 - 12:50 PM K-ESD have you tried what I suggested?
cause from your ... Jul 16, 2006 - 4:04 PM Dr_Tweak K-ESD is correct, there's nothing wrong with t... Jul 16, 2006 - 4:29 PM jcbass7 yes i understand that the problem is not the fuel ... Jul 16, 2006 - 8:01 PM jcbass7 EDIT: I just went out to double check the pink wi... Jul 16, 2006 - 8:17 PM Dr_Tweak QUOTE(jcbass7 @ Jul 17, 2006 - 1:17 ... Jul 16, 2006 - 8:24 PM K-ESD you're getting closer
relay works so you can m... Jul 16, 2006 - 8:58 PM jcbass7 i'm going to have to buy more fuses and test i... Jul 16, 2006 - 11:00 PM jcbass7 ok here is the update...
the 15amp fuse blows eve... Jul 17, 2006 - 8:34 AM jcbass7 OK with tweaks help i have made progress (for anyo... Jul 17, 2006 - 6:17 PM Dr_Tweak Hmm this is odd.
Yes, code 14 will cause the engi... Jul 17, 2006 - 7:55 PM jcbass7 I'm going to have to draw a diagram of this.. ... Jul 18, 2006 - 10:44 AM lagos check your harness plug that goes to the ignitor. ... Jul 17, 2006 - 8:03 PM phattyduck QUOTE(lagos @ Jul 17, 2006 - 6:03 PM... Jul 17, 2006 - 8:33 PM jcbass7 QUOTE(phattyduck @ Jul 17, 2006 - 8... Jul 17, 2006 - 9:25 PM jcbass7 QUOTE(lagos @ Jul 17, 2006 - 8:03 PM... Jul 18, 2006 - 10:54 AM WannabeGT4 Your ECU is definitely form a 92-93 celica.
Looki... Jul 18, 2006 - 1:52 PM jcbass7 correct i did not buy a clip (mistake) but i actua... Jul 18, 2006 - 2:14 PM WannabeGT4 QUOTE(jcbass7 @ Jul 18, 2006 - 2:14 ... Jul 18, 2006 - 3:06 PM Dr_Tweak Okay, ECU is correct, the are you sure that the 16... Jul 18, 2006 - 2:28 PM jcbass7 how about the 26 pin...
should that have pins in ... Jul 18, 2006 - 10:31 PM jcbass7 Ok this diagram shows EXACTLY what my wiring looks... Jul 19, 2006 - 1:31 PM Dr_Tweak Okay well the THW is an odd one, there must be a b... Jul 19, 2006 - 4:05 PM jcbass7 ok so this is a bit weird
i thought i might che... Jul 19, 2006 - 5:58 PM jcbass7 ok well im almost positive code 12 is because the ... Jul 19, 2006 - 6:06 PM Dr_Tweak QUOTE(jcbass7 @ Jul 19, 2006 - 11:06... Jul 19, 2006 - 6:51 PM jcbass7 Ok well i cleared the codes and 12 went away now i... Jul 20, 2006 - 9:06 AM phattyduck QUOTE(jcbass7 @ Jul 20, 2006 - 7:06 ... Jul 20, 2006 - 3:33 PM jcbass7 QUOTE(phattyduck @ Jul 20, 2006 - 3... Jul 20, 2006 - 4:39 PM Dr_Tweak Okay so now it's cranking, but you have no sta... Jul 20, 2006 - 4:47 PM jcbass7 QUOTE(Dr_Tweak @ Jul 20, 2006 - 4:47... Jul 20, 2006 - 4:50 PM jcbass7 ok ran a new wire and still getting code 22 (clear... Jul 20, 2006 - 4:59 PM Dr_Tweak Is it plugged in? Does the brown wire have continu... Jul 20, 2006 - 5:06 PM jcbass7 ill check, brb one sec
ok im not incredibly sure ... Jul 20, 2006 - 5:10 PM Dr_Tweak Run a wire from the brown wire to a good ground an... Jul 20, 2006 - 5:12 PM jcbass7 ok i ran the ground, and now after clearing the co... Jul 20, 2006 - 5:24 PM Dr_Tweak Okay, DO you have spark? Jul 20, 2006 - 5:28 PM jcbass7 Yes i do, i even got shocked checking it.
I teste... Jul 20, 2006 - 5:46 PM Dr_Tweak No, should be fine. Is your fuel pump running when... Jul 20, 2006 - 5:51 PM jcbass7 ok i AM getting fuel at the top of the fuel filter... Jul 22, 2006 - 6:48 PM jcbass7 ok so i ran the codes for the fun of it...
now i... Jul 22, 2006 - 7:15 PM lagos QUOTEok i beleive the wires are in the right order... Jul 22, 2006 - 8:44 PM jcbass7 QUOTE(lagos @ Jul 22, 2006 - 8:44 PM... Jul 22, 2006 - 8:53 PM lagos do you have your fuel injector resistor pack hooke... Jul 22, 2006 - 10:20 PM jcbass7 QUOTE(lagos @ Jul 22, 2006 - 10:20 P... Jul 23, 2006 - 8:24 AM K-ESD QUOTE(jcbass7 @ Jul 23, 2006 - 10:24... Jul 23, 2006 - 8:39 AM jcbass7 anywhere special? i have barely any slack on the c... Jul 23, 2006 - 9:03 AM presure2 QUOTE(jcbass7 @ Jul 23, 2006 - 10:03... Jul 23, 2006 - 9:55 AM jcbass7 ok thats bolted down as well as the coil pack, now... Jul 23, 2006 - 9:24 AM jcbass7 is there a way i can test the injectors to see if ... Jul 23, 2006 - 9:34 AM jcbass7 currently a work in progress manny
i moved the... Jul 23, 2006 - 10:00 AM lagos QUOTEis there a way i can test these to see if the... Jul 23, 2006 - 11:56 AM phattyduck Sounds like you also should check for power at the... Jul 24, 2006 - 3:49 AM jcbass7 You sure they need 12v with the key to the ON posi... Jul 24, 2006 - 1:38 PM jcbass7 ok i am getting no voltage on tkhe injectors when ... Jul 25, 2006 - 8:36 AM phattyduck QUOTE(jcbass7 @ Jul 25, 2006 - 6:36 ... Jul 25, 2006 - 12:50 PM |
43 User(s) are reading this topic (43 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 24th, 2025 - 11:25 AM |