3sgte with a e153 but what axles, ???? Options

[urbandork]

woul a pair of st205 axles work with a 3sgte and a e153 and the stock gt spindles?? what axle combo if any would i neeed

[WannabeGT4]

I'm pretty sure you need the MR2 inners and either the Camry V6 from ~90~94 or ST185 outers.

I'll be looking the part numbers up for team_omega later tonight so I'll go ahead and post them up here too.

EDIT: yup, that's what you need plus a spacer:
http://www.6gc.net/forums/index.php?showtopic=32626

Jay, Super, and Burneed both used a section of another axel I belive... celica3sgte had a spacer machined if I'm not mistaken.

This post has been edited by WannabeGT4: Jul 27, 2006 - 1:36 PM

[phattyduck]

I'm pretty sure you need the MR2 inners and either the Camry V6 from ~90~94 or ST185 outers.

I'll be looking the part numbers up for team_omega later tonight so I'll go ahead and post them up here too.

EDIT: yup, that's what you need plus a spacer:
http://www.6gc.net/forums/index.php?showtopic=32626

Jay, Super, and Burneed both used a section of another axel I belive... celica3sgte had a spacer machined if I'm not mistaken.

Camry V6 and MR2 non-LSD inner axles are the same, other than a possible slight difference where the carrier bearing is on the axle (1/4" to 1/2" depending on year). I was able to use complete '90 auto V6 Camry axles on my E153 tranny. You may still need a spacer since the 6GC might be wider than my Camry...

-Charlie