Celica Taillight FAQ, choices for Altezza, Euro, and such |
Celica Taillight FAQ, choices for Altezza, Euro, and such |
Oct 20, 2005 - 1:11 PM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
there are really no aftermarket tail lights for the 6gen Celica (94-99) except
for Hatchback / Liftback Afterburners from QuadConversions (pic below) A very popular choice is the JDM (Japanese Domestic Market) tail lights that were available from 96-99 in Japan. These are available from your local Toyota dealer and (less expensive) from places like ToyotaWorld.com part #s 81561-2B240 (Left) 81551-2B300 (Right) pics below also there are the Celica tail lights form Eurpoe, similar to the USDM ones except the amber part of the directional is larger then the US versions. for Coupe / Convertibles there no aftermarket tails. There are the JDM Curren tails that are a direct fit and very similar to the US coupe/vert tails except they have a clear directional stripe as opposed to the amber in the US version. USDM JDM Curren that's all. This post has been edited by Batman722: Aug 13, 2006 - 10:59 PM -------------------- |
Jul 27, 2006 - 9:58 PM |
|
Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
QUOTE THATS IT! Thats EXACTLY what I was looking for in tail lights. Where is it possible to get something like that done/how was it done, etc... Step one- buy JDM tail lights Step two- slaughter them Step three- hope you don't f*ck up JDM tails Step four- put back together That is going to be more expensive than every other tail light, because those are custom. Not mass produced. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
I'm not really an asshole, but I play one on the internet. **** Photobucket |
Jul 28, 2006 - 6:04 PM |
|
Enthusiast Joined Apr 17, '06 From under your bed. Currently Offline Reputation: 4 (100%) |
QUOTE(95CelicaST @ Jul 27, 2006 - 9:58 PM) [snapback]462187[/snapback] QUOTE THATS IT! Thats EXACTLY what I was looking for in tail lights. Where is it possible to get something like that done/how was it done, etc... Step one- buy JDM tail lights Step two- slaughter them Step three- hope you don't f*ck up JDM tails Step four- put back together That is going to be more expensive than every other tail light, because those are custom. Not mass produced. Those aren't even the JDM Tail Lights. They are stock. Look at the black linings. It looks like they took the glass lens part off the JDM tail lights though. And they took a pair of LED tail lights and broke it up and most likely crazy glued it carefully together. That those Tail Lights look very precisely done and proffesionally done. Doesn't look half a$$ed and looks very clean. -------------------- |
Lo-Fi Version | Time is now: November 30th, 2024 - 4:13 AM |