Need help wiring JDM power folding/retracting mirrors., 90% done. with wiring diagram Options

[azian_advanced]

ok. so i've installed my jdm mirrors. i've already figured out which wires do what (ie retracting and adjusting). i got the mirror control relay with mine also

everything seemed pretty straight forward after all the testing.. the vertical and horizontal wires match up with the stock ones..

i'm trying to get my mirrors to work with the relay..




based on the pic above.. the wires on the mirror control relay matched up with the retracting wires for both mirrors. that just leaves me with three wires left:

1. Pink Wire (99% sure it's the switch wire which connects with the pink wire from the control switch)
2. White wire with Black Strip (i'm almost sure it's the Ground/Chassis wire??)
3. Blue wire with Yellow Strip (i'm guessing this is the Positive Battery wire??)

everything is wired up, but still won't retract.. need help

This post has been edited by azian_advanced: Jul 31, 2006 - 8:55 AM

[azian_advanced]

thank you... will do. thanks.

offtopic, also just want to add, because they are RHD mirrors, for LHD the angles of the mirrors are not the same. they can only move so far.. both mirrors are adjusted all the way to it's maximum though the pass-side can't be adjusted to its ideal angle while the driverside is good but is adjusted all the way to it's max.