Tein S-Tech's Installed!!! Pics and Notes Options

[Fastbird]

Ok, here's the installtion pics and notes:

Starting out:


Front Strut:


The car here is a 99. Notice in the picture above that in addition to the brake line, there's an additional wheel sensor line (ABS maybe??) that must also be removed. It's a 10mm bolt.

Front done looking like it's got a rear lift:


Rear Strut:


Same thing to note here as on the front, the additional wheel sensor line that must be removed.


Technique for removal/installation of sway bar end link. Craftsman reversible ratcheting wrenches are the bomb.


All done!!!!!!!!!! This is killer now. I highly recommend the S-Techs. Ride quality is VERY comparable to stock until you load the suspension up in a turn, and then you can tell that something isn't normal. Anyway, here's pics!!!!

Before:

After:








Added these today finally:


And courtesy of Dr. Tweak........sort of a calling card:


This post has been edited by Fastbird: Aug 5, 2006 - 6:34 PM

[azian_advanced]

i like this angled pic.
i have s-techs on mine too but i just did the fronts cuz imo, it looks better this way. i don't have any pics with the teins installed yet tho..

[celicaST]

i like this angled pic.
i have s-techs on mine too but i just did the fronts cuz imo, it looks better this way. i don't have any pics with the teins installed yet tho..

lol i only have the front installed on my car at the moment too. i have prokit springs with 1" drop so its not as angled though. i actually like the way it looks now, but i will be putting on the rear as soon as i get around to it.

This post has been edited by celicaST: Aug 7, 2006 - 5:23 PM