6G Celicas Forums

Welcome Guest ( Log In | Register )

> Engine swap 1.6L 4A-FE to 1.8L 7A-FE, Anyone done it?
post Jul 25, 2006 - 11:25 PM
+Quote Post
Bikeman982

Enthusiast

Joined Jul 25, '06
From Vacaville
Currently Offline

Reputation: 0 (0%)




I have swapped engines and transmissions and am running into some questions for someone that has done it. Please let me know if you have.
 
Start new topic
Replies
post Aug 8, 2006 - 5:10 PM
+Quote Post
Bikeman982

Enthusiast

Joined Jul 25, '06
From Vacaville
Currently Offline

Reputation: 0 (0%)




After careful examination of the cars wiring and also the connections to both 4A-FE and 7A-FE ECM/ECU's, I have come to the conclusion that I need to abandon the project.
Althought it is physically and mechanically possible to swap a 1.6L 4A-FE engine and A131L transmission with a 1.8 L 7A-FE engine and A245E transmission, it is electrically unfeasible (within my capabilities) to convert.
My next step I believe will be to locate a working 1.6L 4A-FE engine and purchase it for replacing the 7A-FE engine that I have installed in the car.
I will re-use the old transmission (which is still good) and also the old wiring harness and ECM/ECU (will match up with no complications).
Thank you all for the helpful advice and encouragements.
Unfortunately the operation was a failure and my only recourse is to return it (as much as possible) to stock condition.
At this point my son will settle for any operating vehicle and this decision seems to lead to that desired outcome.

Posts in this topic
- Bikeman982   Engine swap 1.6L 4A-FE to 1.8L 7A-FE   Jul 25, 2006 - 11:25 PM
- - Dr_Tweak   What questions do you have? I'd be happy to he...   Jul 26, 2006 - 8:52 AM
- - Bikeman982   I have an engine, transmission, wiring harness, an...   Jul 28, 2006 - 10:37 PM
|- - Dr_Tweak   QUOTE(Bikeman982 @ Jul 29, 2006 - 3...   Jul 28, 2006 - 11:19 PM
- - Bikeman982   The stock harness does not have the correct connec...   Aug 1, 2006 - 1:22 AM
|- - Dr_Tweak   QUOTE(Bikeman982 @ Aug 1, 2006 - 6:2...   Aug 3, 2006 - 9:31 AM
- - Bikeman982   Upon further examination I have discovered that th...   Aug 2, 2006 - 5:21 PM
- - Bitter   hey bike, it sounds like you have an ob2 harness m...   Aug 2, 2006 - 6:28 PM
- - Bikeman982   The engine/tranny and wiring harness - ECM/ECU cam...   Aug 3, 2006 - 6:55 PM
|- - Kwanza26   QUOTE(Bikeman982 @ Aug 3, 2006 - 11...   Aug 3, 2006 - 7:14 PM
- - Bikeman982   What about something similar - I swapped the engin...   Aug 3, 2006 - 7:46 PM
|- - Kwanza26   QUOTE(Bikeman982 @ Aug 4, 2006 - 12...   Aug 3, 2006 - 8:17 PM
- - Bitter   wouldnt the 4afe ecm make the 7afe run lean since ...   Aug 3, 2006 - 8:48 PM
|- - Dr_Tweak   QUOTE(Bitter @ Aug 4, 2006 - 1:48 AM...   Aug 3, 2006 - 9:36 PM
- - Bikeman982   What about the problem with the connector and tran...   Aug 3, 2006 - 11:50 PM
|- - Kwanza26   QUOTE(Bikeman982 @ Aug 4, 2006 - 4:5...   Aug 3, 2006 - 11:52 PM
- - Bikeman982   The wires I am referring to connect to the Park/Ne...   Aug 4, 2006 - 1:44 AM
- - Bitter   http://www.corolland.com/forums/index.php?...30...   Aug 4, 2006 - 10:27 PM
|- - Bikeman982   QUOTE(Bitter @ Aug 4, 2006 - 10:27 P...   Aug 4, 2006 - 11:44 PM
|- - Kwanza26   QUOTE(Bikeman982 @ Aug 5, 2006 - 4:4...   Aug 5, 2006 - 12:44 AM
|- - Bikeman982   QUOTE(Kwanza26 @ Aug 5, 2006 - 12:44...   Aug 8, 2006 - 1:41 AM
- - Bitter   i think he wants the 4spd auto with the 7afe for f...   Aug 5, 2006 - 11:05 AM
- - Bikeman982   After careful examination of the cars wiring and a...   Aug 8, 2006 - 5:10 PM
- - Kwanza26   I still say the tranny issue can be dealt with pre...   Aug 11, 2006 - 3:25 AM
- - Bikeman982   Transmissions are not the same. The main problem n...   Aug 11, 2006 - 3:32 AM
- - Bikeman982   I have abandoned the larger engine/tranny and pull...   Aug 18, 2006 - 3:19 AM
- - Bikeman982   I had trouble (once again) when matching the trans...   Aug 19, 2006 - 9:01 PM
- - Bikeman982   Tomorrow I start connecting everything back up and...   Aug 25, 2006 - 3:22 PM
- - Bikeman982   UPDATE: Today I installed the starter, the charcoa...   Sep 5, 2006 - 12:11 AM
- - Bikeman982   Everything but the drive shafts have been installe...   Sep 13, 2006 - 12:37 AM
- - Bikeman982   I bought a new battery and the car cranked fine - ...   Sep 15, 2006 - 7:29 PM
- - Bikeman982   Here is an update. Car would not start and did n...   Jan 12, 2007 - 10:45 PM
- - normality78   hm... weird. i personally had my 4afe engine chang...   Jan 18, 2007 - 11:33 PM
|- - Bikeman982   QUOTE(normality78 @ Jan 18, 2007 - 11...   Jan 19, 2007 - 12:11 AM
|- - normality78   QUOTE(Bikeman982 @ Jan 19, 2007 - 12...   Jan 19, 2007 - 12:03 PM
- - Bikeman982   Update: The car has been sold to a man looking for...   Jan 26, 2007 - 11:07 PM


Reply to this topicStart new topic
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 24th, 2024 - 10:09 AM