JDM Power Folding Mirrors, Please help with installation... Options

[DSRT-FX]

hey 6gc'rz
well i've just ordered some jdm power folding mirrors. only thing is i dont know if i should go ahead with the purchase i want them to work without too much fuss? the questions are:

1. are they plug and play?
2. how hard is it to take out the housing of the original mirrors?
3. do i need additional wires or connections to make them work.
4. where abouts is the relay box screwed/placed on?

i've posted 2 pics at the bottom that may be able to help.
if anyone can take pics of the stuff it will help me greatly especially with the mounting of the relay box. i might even be able to make a how-to-article for this.. thanks ohh yeah i've search the website and turboinduction did have a thread don't know what happened to it though just kindah ended up abruptly. -R

[azian_advanced]

i tested out the relay i had... there was something fishy about it because when i test them through a 12V tester the mirrors work nicely, but when hooked up to the relay box, the pass side still forces itself to close (when it's already closed)

so i open up the relay box and i tested the 4 relays soldered on the board. it just so happens one of them was defected (it was stuck on). fortunately the seller was able to send me another one just pay $4.50 for shipping only. (i guess he's confident i'm not trying to scam him). but i also bought a jdm prelude relay just in case. so i'l be completing the wiring as soon as i get the new relays in... can't wait

dsrt-fx, the wiring is pretty straight forward imo. the hard part is getting things in the door loom and trying to keep the job as professional as it can be.