 Tein Super Street/Coilover Conversation |
 Aug 10, 2006 - 6:36 PM
|
 
|
 Enthusiast  Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%)  |
I 'd like some feedback regarding a few things with the coilovers and SS system. Things such as whats your ride height (how many threads are showing below the locking nut). How long/did your coilovers settle? What damping setting on the SS are u using?
Thanks guys I'd just like to compare. On a side note, wow this suspension is great. Its unrelenting, takes the turns like a champ. Bumpier ride though. -------------------- |
 |
Replies
|
Aug 12, 2006 - 2:01 AM
|
|
 Enthusiast Joined Mar 17, '05 From The Netherlands Currently Offline Reputation: 0 (0%) |
Rear end should hit harder. Since the springs in front are 4 kgf/mm and the rear one's are 3 kgf/mm.
Weight balance is about 63% front/ 37% rear. So even so the springs are softer in the back, they have to carry so much less weight so on the same setting they feel harder. But I set the back harder then the front (got EDFC) so the are Level 0 (hardest) in the rear and Level 4 in the front. Thinking with thicker swaybar in the rear I can put the back out. -------------------- JDM Powerplant installed, BPU coming very soon!
 |
Posts in this topic
Supersprynt Tein Super Street/Coilover Conversation Aug 10, 2006 - 6:36 PM
playr158 are you at TEINs recommended "stock" hei... Aug 10, 2006 - 8:27 PM Supersprynt I think im lower, but its not ridiculously low. Th... Aug 10, 2006 - 8:29 PM Silver94CelicaOwner My height is at the "standard setting" t... Aug 11, 2006 - 1:32 AM purplegt4 12 front
9 rear Aug 11, 2006 - 1:40 AM
purplegt4 QUOTE (purplegt4 @ Aug 11, 2006 - 2... Aug 4, 2011 - 9:14 AM presure2 this is good stuff.
added to the sticky! Aug 11, 2006 - 7:19 AM Supersprynt I've found my rear end hits alot harder than t... Aug 11, 2006 - 12:39 PM purplegt4 for USDM SS dampers its 7 kgf/mm front and 5kgf/mm... Aug 12, 2006 - 3:18 AM Supersprynt Kadett im surprised you can drive around with it a... Aug 12, 2006 - 9:43 AM Kadett I have driven it without EDFC for about 2,5 months... Aug 12, 2006 - 11:15 AM Supersprynt Here are some pics of where my springs are set and... Aug 12, 2006 - 10:51 PM presure2 QUOTE(Supersprynt @ Aug 12, 2006 - 10... Jan 31, 2008 - 7:22 AM 6G94celica i have a question about edfc. ive read that it is ... Jan 27, 2008 - 2:12 AM Supersprynt I don't have any tire to actually put in there... Jan 31, 2008 - 9:18 AM MaskedMan I was running on the lowest setting in the front a... Feb 1, 2008 - 4:15 PM Penkka your right maskedman, and I read this because I ha... Feb 4, 2008 - 8:28 PM BonzaiCelica im sorry but what is the max drop on these tein... Aug 30, 2009 - 2:02 AM Promasta it says on there site
2.4" front, 1.2" r... Aug 30, 2009 - 2:31 AM 95CelicaST Megan is not quality stuff. They're made from ... Aug 30, 2009 - 2:52 AM BonzaiCelica ok thanks, but these teins dont come with upper st... Aug 30, 2009 - 4:08 AM 808celica k after searching around i found this
http://www.... Aug 30, 2009 - 4:31 AM Harold_Fastwaker Well, Tein probably wont do the trick. And of all... Sep 6, 2009 - 10:34 PM BonzaiCelica megan has been around since 2001. d2 and k sport h... Sep 7, 2009 - 3:14 PM Rusty Just wondering if anyone has this in english? I so... Jan 19, 2010 - 3:25 AM Rusty so noone has it in english? Jan 21, 2010 - 12:14 AM BonzaiCelica haha funny that you mention japanese. I actually j... Jan 21, 2010 - 1:31 AM Rusty just interested thats all, would like to know what... Jan 21, 2010 - 3:18 AM BonzaiCelica guys Ive notice that there is a difference between... Sep 7, 2010 - 11:49 PM Rusty The ST202 series (superstrut & Mcpherson) shar... Sep 8, 2010 - 2:49 AM azian_advanced this is just a guess and i can't read japanese... Sep 8, 2010 - 9:41 PM Rusty cool thanks for that, I thought it might have had ... Sep 9, 2010 - 1:46 AM BonzaiCelica QUOTE (Rusty @ Sep 8, 2010 - 2:49 AM... Sep 10, 2010 - 1:33 AM azian_advanced i did some checking and based on TEIN's japane... Sep 10, 2010 - 7:37 AM BonzaiCelica OK So I understood you. but do not mix superstrut ... Sep 10, 2010 - 10:42 PM Rusty different driving conditions? Sep 11, 2010 - 12:57 PM BonzaiCelica QUOTE (Rusty @ Sep 11, 2010 - 12:57 ... Sep 11, 2010 - 2:28 PM BonzaiCelica As most of you know driving conditions here in Cal... Oct 2, 2010 - 4:27 AM Johnnyny dat price is not too bad i was expecting worse Oct 2, 2010 - 7:44 PM BonzaiCelica question about the height adjustment between the S... Oct 9, 2010 - 5:00 PM 3WayStunna http://www.gtfours.co.uk/what/sus_align/sus_align.... Oct 9, 2010 - 9:37 PM Rusty Don't you remember my alignment I got a while ... Oct 9, 2010 - 11:55 PM BonzaiCelica question between USDM Teins and JDM/Euro Teins
US... Jun 30, 2011 - 3:11 AM BonzaiCelica well I called Tein today and asked them what the h... Jul 18, 2011 - 11:41 PM Rusty Is anyone running a EDFC with their Tein coilovers... Oct 1, 2013 - 3:10 AM Tigawoods bumping this up
http://www.6gc.net/members/3844
... Jan 13, 2014 - 1:03 PM Rusty That's interesting about the made to order Tei... Jan 15, 2014 - 6:02 PM Tigawoods The ST202's seem to be yeah you are right. The... Jan 15, 2014 - 6:26 PM BonzaiCelica called Tein USA headquarters and they quote ... Jan 31, 2014 - 8:01 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 23rd, 2025 - 11:01 AM |