Sway bar end links, need new ones Options

[orvillescelica]

So like many others on here, during spring/shock install, i had to cut off the sway bar end links to get them off. So of course i need new ones. I would like to upgrade if i can so next time i wont have this problem. Does anyone know if ones from a st185 would work, as in they being a similar length? I have found great ones here:

http://www.twosrus.com/catalog/product_inf...products_id=254

If they dont work, ive been told i can call them and they will custom make some to the correct length.

[orvillescelica]

GOOD NEWS FOR US! i got my answer by emailing them:

I was wondering if you made sway bar end links for the 94-99 celica. If not,
can they be custom ordered? They are very similar to your MR2 and st185
ones. link to picture of sway bar end links:

http://www.lewfx.com/6GC/end_links.jpg

the center bar from weld to weld is about 7.7 cm

thank you,
Asher Yap

From: David Hawkins
Club MR2 <orders@clubmr2.com>

It appears to be the same as the ST185 rear link. That's just
over 3" between the ends and the ends face the opposite directions.



Which means.... Cut away at those old crusty ones, cause now you can order these stronger ones with a nut on bolt design so youll never have to use that hex key ever again! I just ordered some, both for $75 shipped. Ill let you all knwo how they work out.

This post has been edited by orvillescelica: Aug 14, 2006 - 12:24 PM

[presure2]

GOOD NEWS FOR US! i got my answer by emailing them:

I was wondering if you made sway bar end links for the 94-99 celica. If not,
can they be custom ordered? They are very similar to your MR2 and st185
ones. link to picture of sway bar end links:

http://www.lewfx.com/6GC/end_links.jpg

the center bar from weld to weld is about 7.7 cm

thank you,
Asher Yap

From: David Hawkins
Club MR2 <orders@clubmr2.com>

It appears to be the same as the ST185 rear link. That's just
over 3" between the ends and the ends face the opposite directions.



Which means.... Cut away at those old crusty ones, cause now you can order these stronger ones with a nut on bolt design so youll never have to use that hex key ever again!

david is a great guy, ive met him in person.
good to know the alltrac rears work....now for the fronts!