Six Speed in a 6GC |
Six Speed in a 6GC |
Aug 12, 2006 - 7:38 PM |
|
Enthusiast Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) |
I've heard talk of people thinking about it but have never seen any factual attempts. These things need a sixth gear.
I was pondering, and it probably wouldn't be toooooooo terribly difficult to have a bell housing adapter made for something like a 7th gen and then have a custom input shaft in a longer length made. Are there any other ideas floating around out there? -------------------- |
Aug 15, 2006 - 1:41 AM |
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
like i already said someone needs to take the OEM gear ratio #s outta an E153 or S54 (both would be nice) and start talking to a shop that cuts gears..and discuss about making LONGER gear ratios..in theory it should be a bolt in application and all you need to do is swap out your gears in the existing bell housing (yes this has been done before)
i'm not sure if you could fit a 6th gear...but lengthening gears 2-5 is doable probably at the cost of a few hundred dollars |
Lo-Fi Version | Time is now: November 24th, 2024 - 5:44 AM |