![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 12, '03 From Portland , Oregon , United States Currently Offline Reputation: -1 (33%) ![]() |
![]() ![]() Ive seen quite a few mounting spots for the 4 point setup but nothing that seems to safe, if anyone wants to modify my pics with where they should be mounted it would be appeciated. DTE -------------------- I am a thief.
do not buy anything from me. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
Jaws
yours arn't DOT approved there is only 1 set that are DOT approved that are currently produced the producer of the DOT approved Schroth http://www.soloracer.com/schroth.html they can be found here you need to have a harness bar made for your car basically it bolts between your "B-pillars" right behind the seat (basicall where your OEM seat belt bolts to the "B-pillar" is where you will bolt in the harness bar)...IT MUST BE NO LOWER THEN 30 DEGREES BELOW YOUR SHOULDERS..it is critical that you understand this concept and follow it..any lower then 30* and spinal compression and severe body injury can occur in a collision.. good luck |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 27, '04 Currently Offline Reputation: 14 (100%) ![]() |
QUOTE(playr158 @ Aug 15, 2006 - 6:36 AM) [snapback]469139[/snapback] Jaws yours arn't DOT approved there is only 1 set that are DOT approved that are currently produced the producer of the DOT approved Schroth http://www.soloracer.com/schroth.html they can be found here you need to have a harness bar made for your car basically it bolts between your "B-pillars" right behind the seat (basicall where your OEM seat belt bolts to the "B-pillar" is where you will bolt in the harness bar)...IT MUST BE NO LOWER THEN 30 DEGREES BELOW YOUR SHOULDERS..it is critical that you understand this concept and follow it..any lower then 30* and spinal compression and severe body injury can occur in a collision.. good luck What if I mount them to the back seat where those shoulder belt is located? Is that an acceptable method of installing them? I just want to install them so it would be safe but not have to go into putting in the Harness Bar.. -------------------- ~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207
![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 6:46 AM |