HELP!!!, i'm stuck and without my car Options

[celi_gt_racer]

I'm in the middle of changing out both front axles on my 97GT... the passenger side front is as far as we got tonight - when we took the old axle out there is this little thing called the center bearing bracket you have to take out w/ the axle... my question is- HOW DO YOU GET IT OFF THE OLD AXLE AND ONTO THE NEW ONE!?

Here's the old passenger's side front

is there any more tricky crap i'll need to know to replace the drivers side??? i dont want to be stuck without a car any longer

I gotta get both these new front axles on before i can put on these baby's

please help me quickly

This post has been edited by celi_gt_racer: Aug 24, 2006 - 10:22 PM

[celi_gt_racer]

so where can i buy a new center bearing bracket to put on the new axle? and how do i get it put on? btw the rings that held the inner boot on were still there - just broken at where they sealed 2 the axle and the boot had slid back - the broken ring part just wasnt included in the picture. Anyways - any suggestions... i need to have this thing driving again before the weekend's over

and hitchachi - the new axles were bought rebuilt from NAPA ... but that piece wasn't on the right axle- should i take it back to NAPA and get them to order a new one??