6G Celicas Forums

Welcome Guest ( Log In | Register )

> Transmission/Axles/Halfshaft
post Sep 10, 2006 - 10:36 AM
+Quote Post
nemesis

Enthusiast
*
Joined Jan 14, '06
From New York
Currently Offline

Reputation: 0 (0%)




Hello, everyone. I just had a 1991 MR2 turbo FWD tranny placed in my car as a replacement for the AWD tranny. It's the perfect swap except that I have to get a new set of axles (maybe because those on the Celica are long) and a halfshaft to complete the project. Would those have to come from an MR2 as well and from what year if so?

Thanks,
nemesis


--------------------
I drive a Celica. Anything "less" is just a car!
 
Start new topic
Replies
post Sep 10, 2006 - 3:43 PM
+Quote Post
eggman40



Enthusiast
****
Joined Aug 17, '04
From California
Currently Offline

Reputation: 20 (100%)




I used the mr2 turbo half shafts, and used a 92' V6 camry(nonABS) outter axels to go into the hubs of my 94st celi. I used a 1992 camry axles because my e-153 tranny is from a 92 mr2. So far about 5 months and still no problems. Hope this helps
post Sep 10, 2006 - 6:41 PM
+Quote Post
nemesis

Enthusiast
*
Joined Jan 14, '06
From New York
Currently Offline

Reputation: 0 (0%)




eggman40, is the '91 MR2 turbo tranny the same code as the '92 (e-153)? And is your tranny manual? I am assuming that you have the 3SGTE motor in your car?

p.s. Thanks for the info!

QUOTE(eggman40 @ Sep 10, 2006 - 3:43 PM) [snapback]478107[/snapback]

I used the mr2 turbo half shafts, and used a 92' V6 camry(nonABS) outter axels to go into the hubs of my 94st celi. I used a 1992 camry axles because my e-153 tranny is from a 92 mr2. So far about 5 months and still no problems. Hope this helps



--------------------
I drive a Celica. Anything "less" is just a car!

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 20th, 2025 - 6:06 AM