HELP!!!, i'm stuck and without my car Options

[celi_gt_racer]

I'm in the middle of changing out both front axles on my 97GT... the passenger side front is as far as we got tonight - when we took the old axle out there is this little thing called the center bearing bracket you have to take out w/ the axle... my question is- HOW DO YOU GET IT OFF THE OLD AXLE AND ONTO THE NEW ONE!?

Here's the old passenger's side front

is there any more tricky crap i'll need to know to replace the drivers side??? i dont want to be stuck without a car any longer

I gotta get both these new front axles on before i can put on these baby's

please help me quickly

This post has been edited by celi_gt_racer: Aug 24, 2006 - 10:22 PM

[94celicadude]

drivers side is a more of a bitch
my sugg. is to use a long screw driver, and come from an angle from under the car point out toward the fender, there should be sets of 2 risen bars on the shaft, put ur screw driver in between there and use a hammer to knock it loose, it takes a good whack at it, and its easier if you use like a long cold chizel, good luck.