3SGE Vs 3SGTE, What parts are compatible |
3SGE Vs 3SGTE, What parts are compatible |
Jul 21, 2003 - 4:50 AM |
|
Enthusiast Joined Apr 17, '03 From Cork, Republic of Ireland Currently Offline Reputation: 0 (0%) |
Hi Guys(and Gals),
I have been trying to find performance parts for my 3SGE, but there are not many parts out there... But I notice that there are some parts which are interchangable between the 3SGTE and the 3SGE. e.g. Fly Wheel, radiator hoses, pistons etc Anyone have a list of the parts which can be interchanged? It would open up a whole new world of available performance mods for the 3SGE if there are more parts that can be swapped. Most catalogs list parts available for Celicas but for some reason the 94-99 3SGE seems to be skipped. Every other type of Celica is listed. Should I be looking at the 3SGTE section? Any help would be greatly appreciated, I am getting more and more frustrated trying to find even the most basic of mods. |
Jul 23, 2003 - 3:05 PM |
|
Enthusiast Joined Jan 27, '03 From st.lucia Currently Offline Reputation: 0 (0%) |
most of the parts on the block are the same like pulleys, water pump,power steering pump, distributor cap, cam gears etc. however in doing the swap there are a few things u will need from the st-205 like the map sensor and harness, computer also if fensport is going to keep the stock setup for the 97 3sgte u will need the intercooler pump and all the parts needed to make the water to air setup work. to make things a lot easier and cheaper u could use your stock gearbox instead of the mr2 gearbox which needs to be modified.
|
Lo-Fi Version | Time is now: November 25th, 2024 - 1:38 AM |