6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3SGE Vs 3SGTE, What parts are compatible
post Jul 21, 2003 - 4:50 AM
+Quote Post
khye



Enthusiast
*
Joined Apr 17, '03
From Cork, Republic of Ireland
Currently Offline

Reputation: 0 (0%)




Hi Guys(and Gals), wink.gif

I have been trying to find performance parts for my 3SGE, but there are not many parts out there...
But I notice that there are some parts which are interchangable between the 3SGTE and the 3SGE.
e.g. Fly Wheel, radiator hoses, pistons etc

Anyone have a list of the parts which can be interchanged? confused.gif
It would open up a whole new world of available performance mods for the 3SGE if there are more parts that can be swapped.

Most catalogs list parts available for Celicas but for some reason the 94-99 3SGE seems to be skipped.
Every other type of Celica is listed.

Should I be looking at the 3SGTE section?

Any help would be greatly appreciated, I am getting more and more frustrated trying to find even the most basic of mods.
 
Start new topic
Replies
post Jul 25, 2003 - 2:02 AM
+Quote Post
Guest_Matthew_*











QUOTE (1900 @ Jul 23, 2003 - 12:19 PM)
most of the parts on the block are the same like pulleys, water pump,power steering pump, distributor cap, cam gears etc. however in doing the swap there are a few things u will need from the st-205 like the map sensor and harness, computer also if fensport is going to keep the stock setup for the 97 3sgte u will need the intercooler pump and all the parts needed to make the water to air setup work. to make things a lot easier and cheaper u could use your stock gearbox instead of the mr2 gearbox which needs to be modified.

he isnt swapping a 3s-gte in favor of his 3s-ge

he is looking for performance parts


Top Secret Japan


and

HKS makes a head gasket that lowers the compression for a lofty 12:1 to 9.5:1 more boost friendly ratio

i would say go with the top secret one
it'll be more but its better

its specificly made for the 3s-ge to handle boost more safely

Posts in this topic
- khye   3SGE Vs 3SGTE   Jul 21, 2003 - 4:50 AM
- - Matthew   most JUN parts are made to fit both engines. its ...   Jul 21, 2003 - 9:11 AM
- - khye   I am not really too sure about that dude! Th...   Jul 21, 2003 - 10:04 AM
- - 97sccelica   well, a lot of parts are interchangeable because t...   Jul 21, 2003 - 11:38 AM
- - 1900   most of the parts on the block are the same like p...   Jul 23, 2003 - 3:05 PM
- - Matthew   QUOTE (1900 @ Jul 23, 2003 - 12:19 PM) most of the...   Jul 25, 2003 - 2:02 AM


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 25th, 2024 - 1:34 AM