Finally got a wideband o2, zetronix ZT-2 Options

[presure2]

so yea, over a year later..i finally broke down and bought a wideband. lol
i figured it'd be nice to actually tune the car off boost...lmao rather than just adjusting things by feel..lol

i knew i wanted somthing that had datalogging capabilitys, so i started looking around at some of the units out there...
since i did not need a display, (ill be using a laptop for display and datalogging) i ended up getting the Zetronix unit, because it includes datalogging capabilitys, with A/F, RPM, TPS, (all included with no extras to buy) and can also log EGTs (it comes with a pigtail to make an extension if you already have one, or you can buy the probe from them) and boost.
the sensor range is 9.5:1 - 21:1
it does have an optional display,so that you can have a standalone display setup, if thats what you want/need.
heres a pic of everything you get when you order the unit.

heres a screenshot of the logging/display screen.


ill have some datalogs and more screenshots for you guys later this week.

[x_itchy_b_x]

manny, iv read a thread somewhere were this guy hooked the safc up so instead of reading throttle postion it read boost lvls and now instead of tuning with throttle position it tunes to boost pressure and rpm. it was on a 3sgte 2. bar map sensor also. they have close to the same sensor voltages. 0. - 5volts, its just a potenteometer, iunno. /shrug
giving you a 30 70 high and low boost. or w/e you set it to.

http://www.alltrac.net/mods/boostedSAFC.html
here you go buddy, check that out. maybe it will suite you better. who knows.

This post has been edited by x_itchy_b_x: Oct 16, 2006 - 4:44 PM