Some Recent Chalkboard SE-R Work Options

[Coomer]

For the longest time I just drove my chalkboard SE-R and didn't do anything to it besides crash it into a guardrail. Instead, I spent most of my time on the Celica.

Recently though, I've decided to do some work to the SE-R.

First up was a front lip which I don't know if you guys have seen, Home Depot style. I got some gutter flashing stuff and made this front lip. Total cost was around $3.50.





Then I found a B14 SE-R at a junkyard, and got the 60/40 folding rear seat with the brackets and plastic panels behind it for $30. It took a bit of fabrication to get it to work and look right, but it works, and is very nice for putting hockey sticks and whatnot in the trunk now. I'm hoping to find the bottom of the backseat from a 200SX somewhere so that I can see if I can get that to work so I have a uniform look.



Then I found a steering wheel off of an older 200SX, and got it for $15 to replace my very worn stock steering wheel.



And then I got sick of having poor sound quality in my Classic, so I made some fiberglass kick panels and installed some old Pioneer REV coaxials I had lying around in them. A Clarion APX400.4 amp powers them (and my 10" Xtant sub in the trunk,) and they sound pretty good, especially considering the old head unit powering them (was in the car when I bought it) is ten years old. I only paid for the amp, which was $100 shipped from eBay. I had the Xtant sub, box, speakers, wiring supplies, fiberglass, and MDF lying around my house.





The kick panels really sound awesome even just with coaxials...much better actually than my components in the doors of my Celica sound actually. It's tempting to build some kick panels for the Celica, but I really like my dead pedal.

That's it for now...just some budget mods for the neglected other car. I'm planning on getting some Acura LS webs/meshies and boring them out and throwing them on.

Also, I'm thinking about painting it in the spring and dropping in a low mileage UKDM/JDM SR20DE with i/h/e and a lightweight flywheel, possibly even a VE or DET.

People are always asking me about both of my cars, so I figured I'd post up for those of you who are interested. Let me know what you think.

Edit: I also forgot, the non-visual mods are some cheap springs, KYB GR-2 struts, custom bumpstops, an eBay short shifter, ES shifter bushing, and a ghetto intake.

[mzztoyota]

^^^ lol

this reminds me of when I pimped out my lil '86 Nova... ~tear~ ...memories...

the guy I sold it to ruined the clutch within a week, its been sitting in the school parking lot for over a month now. ~sigh~