 6g Power folding mirrors |
 Oct 24, 2006 - 11:44 PM
|
 
|
 Enthusiast  Joined Jun 30, '06 From West Windsor NJ, USA Currently Offline Reputation: 14 (94%)  |
I shoudl be getting my 6g power folding mirror's tommorw with relay and switch is there anything that I should know before I start installing them?
--------------------  --------------------------------私は銀行に漂う,TRD Inspired |
 |
Replies
|
Oct 25, 2006 - 11:43 AM
|
|
 Enthusiast Joined Sep 6, '04 From oakdale Mn Currently Offline Reputation: 0 (0%) |
when swapping guts, the screws at the bottom are a pain so make sure you don't strip them. and wiring the wire for the folding tends to be a pain through the door panel i used a coat hanger and i had to strip off the black electrical tape on the door loom for the hanger to go through. your going to have to cut the clip off the motor to fit them into the usdm housing..then resoder them back on. soon as you get em installed you gotta roll around to that one Ludacris song "Act a fool" that says my sidemirrors flap like a fKing bird.
This post has been edited by rjbibeau: Oct 25, 2006 - 11:51 AM --------------------  |
Posts in this topic
Daftboy 6g Power folding mirrors Oct 24, 2006 - 11:44 PM
DeW_H0e_GT http://www.6gc.net/forums/index.php?showtopic=1720... Oct 25, 2006 - 12:26 AM azian_advanced good luck on the wiring... i still haven't fin... Oct 25, 2006 - 7:21 AM
hunter_D QUOTE(azian_advanced @ Oct 25, 2006 - 12... Oct 25, 2006 - 9:18 AM Batman722 if you use the JDM housings then you will not be a... Oct 25, 2006 - 9:47 AM azian_advanced i basically added tiny ~7mm rubber washers under t... Oct 25, 2006 - 11:08 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 22nd, 2025 - 7:51 AM |