3sgte 3rd gen swap problems solved weeeeeee, Finally started Options

[urbandork]

the engine is droped in and i had everything wired up but it wont start or even turn the engine over....

im using the 3 gen 3s wiring harness and connecting it to the connections that are in my 95 5s fuse box.
ihave noticed that there are a few wires that dont plug into anything on that main plug, the one with that platic hold down that pivots to secure the plug in.
the wires on the harness sid that dont connect with anythin on th car/5s side are a green with red and a single silver strip, a solid blue with one silver strip, and a slightly thicker blue with white and a single silver line.

what do these three connect to?

ive also noticed that on the in side if the car that there ar three plugs that are in front of the ecu,betwen the ecu and the shifter assembly, these three plugs are stacked vertically. while the plugs fit some of the wires dont connect to any thing.


sdsfgdvdjfsfjf@!$#!%~!!!!!!!

im going to cry soon ahhhh


what wires do what and which ones do i have to worry about????

This post has been edited by urbandork: Oct 30, 2006 - 4:08 AM

[lagos]

you need to wire in the COR and fuel pump relay, from what i hear. its not all just plug and play.

[phattyduck]

you need to wire in the COR and fuel pump relay, from what i hear. its not all just plug and play.

Yeah, the COR might be plug-n-play on the ST205 into ST204, but the Fuel Pump Relay and Intercooler Water Pump Relay are not. You have to add wires to the harness that goes around the front of the car. This is no problem if you have a clip and can see how they are run on the ST205...

-Charlie

any idea on which ones? what should i be looking for when i look at the diagrams..... electronics + urbandork= "i dont know and im guna cry lol"

What ever happened to paying me to wire it up for you?!?!

Actually, I'm working to much to have time to do that...

-Charlie