![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) ![]() |
My right turn signal is not working for some reason today after I put the engine back in. It has been sitting for a while and I did take off the tail lights for bondoing, but when I use the right turn signal the turn lamp comes on green and all I can hear is an "annnnnnnnnnnnnnnnnnnnnnnnnnn" sound. The lights don't flash at all. Any possible solutions before I torch the celi down?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) ![]() |
turn signal light bulbs are dual filament so it is entirely possible that only the filament for the blinker is out while the filament for the parking light is fine. I had this problem but it wasn't the bulb that was bad, it was the harness itself.
-------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 2:00 PM |