st to st205 FWD swap and new paint Almost finished!!!, I have a couple of questions for you 3 gen tunners Options

[lantz2121]

This plugs still needs a home I have checked everything I need a st205 owner to verify what this plug is for??



This is the same plug????


I want to know why there would be a spliced line by the stock fuel pressure regulator?? FMU???


Another picture of this T in the fuel regulator line from the manifold to the T to the FPR??? I put the bolt in it.


And the last question is to those with body kits did you use the factory black backing plate things when bolting this section together or just bolt the kit to the fender? Take a look in my profile to see almost complete 3s swap and new paint; the glass is being reinstalled on tues. I am also looking for the two folding pieces of the back seat that match my interior. Thanks Lance

[Xpander]

These topics are very useful for the Code 54 you are getting. I used the method that has the Relay/Light Bulb setup and works just fine. Hope this helps Lance.

Code 54 Elimination Circuit

Resistor Method

-Colin