6g JDM FOlding mirrors, *DONE*VIDEO* Options

[Daftboy]

Sorry to bring up this post but i have the mirror for the 6g... i have most of it wired up i have the relay and everything i need.. on my control box though I have extra wire blue/yelliow. I have no idea where this goes. My mirrors move up,down.left and right fine but they will not retract or open....any ideas...please help

This post has been edited by Daftboy: Nov 6, 2006 - 1:48 PM

[azian_advanced]

thanks...
all i need to finish is a friggin relay! the relay the seller sent me was a dud. 3 of the 4 relays on the circuit board were switching fine, but 1 of them was stuck. so when i pressed the button, they'd close but the motors won't stop and i can hear the motors forcing themselves to close (when they're already closed). the same thing goes for when they open. it took me over 30+ hours to figure out that one relay on the board was dead. i always thought it was the wiring.
i told the seller about it and he sent me another relay, except the one he sent me was for the 96+ (i believe) which has different wiring and less relays on the circuitboard... anyway, that's the end of my rant... all in all, i just need another 94-95 mirror relay.
anybody care to donate?