Injen Intake Question, Need to clear up some things Options

[trdproven]

I know this topic has been discussed many times. but the posts I've read is not clear enough for me to understand. Ok, if you look closer near the throttle body, there is a small pipe opening, what goes there, do I just cap it or do I put something? Second, some people say to cap the opening (opposite side of the sensor) but in this pic there is a breather hose connected. Now, originally, this breather hose connects somewhere towards the throttle body. So in this pic, for example, the hose was disconnected from the TB side and connected to the intake pipe side? Confused here. Does anyone have enough info on this. I mean I've read the threads but it doesn't answer or just confuses me more. Thanks.

(pic is from 6strngs' thread)



This post has been edited by trdproven: Nov 21, 2006 - 1:06 AM

[Stu37363]

the one next to the throttle body i capped on mine, as for the one right next to the sticker.. i used the stock hose, cut it in half, and used the stock restictor in the middle of the two halves.