that spec clutch kit?, how do u like urs? |
that spec clutch kit?, how do u like urs? |
Sep 18, 2006 - 4:28 PM |
|
Enthusiast Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) |
Ive been reading up on that spec clutch kit for 3s swapers using a 5s tranny and i was wondering how you guys like it? and also if ur using a 2nd or 3rd stage? and with a 3rd gen 3s i should be using a 2nd or 3rd stage?
doc tweak says "The combo that most people use is, 3S flywheel, 3S pressure plate, and either a 5S disc or a 3S disc splined for the 5S. Since the only company that makes the 5s splined 3s disc is SPEC, and they haven't been doing that well for us lately, and we have a 5S flywheel (which bolts to the 3S perfectly), the logical solution is to use a high performance 5S clutch kit. This will also simplify things down the road if and when the clutch needs to be replaced again. By the way, the difference in the total outside diameter between the 5S and 3S clutch discs is barely 1/4". The whole issue of using a 3S disc is highly overrated. I'm actually considering using the 5S flywheel and a good stage 2 or stage 3 clutch kit on ALL my swaps from now on. -Doc" i had thought about doing this too. o yeah and teh 245hp that the 3rd gen is speced at is at teh crank right This post has been edited by urbandork: Sep 18, 2006 - 5:00 PM |
Dec 1, 2006 - 12:10 AM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE(toyotacrazy @ Nov 30, 2006 - 10:22 PM) [snapback]506801[/snapback] Im about to just use my exedy stock clutch disc with the trd 3sgte pressure plate. I dont see why the clutch would be an issue. Most clutch companies use the same materials, just different pressure plates for increased torque hold. I donno what to do. Im scared to get a racing clutch. I drove a turbo ford festiva and the clutch was a 4 puck full race. It was either launching like on the drag strip or it would stall. This is my daily driver. I dont want to have to launch it in the snow! Ill just try the stock disc and see what happens. your going to reuse a stock disk that was already in your 5sfe? that will last you a few months at best. do it right and get something upgraded. never buy a 4 puck or less.. those will be horrible on the street. a spring loaded 6puck is a nice way to go. easy to drive on the street while still has the power to grip. they also sell normal disks made out of kevlar (like the spec stage2) that fastbird is talking about. anything like that will be a good bet (assuming spec has fixed their stage2 issues). -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: December 10th, 2024 - 11:08 AM |