3sgte engine in car. now wont start! |
3sgte engine in car. now wont start! |
Dec 9, 2006 - 11:03 AM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
I started my swap last night! Got the engine out and the 3sgte mounted onto the 5s-fe trans. within about 4 hours. The motor mount next to the timing cover had to be modified to fit correctly. Ive heard before its a direct fit for the 5s-fe motor mounts. Its not! Only one bolt lines up without modifications. I took the mount to the grinding wheel and managed to make it fit well. If anybody wants pics give me your e-mail and Ill send you some pics of the mount. Hope this will better prepare some of the future swappers! later-
-toyotacrazy This post has been edited by toyotacrazy: Dec 9, 2006 - 11:06 AM |
Dec 10, 2006 - 3:20 PM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
I got the swap all put together. It wont start! The ecm has code 12 no NE signal. I did some checks, Any Ideas? Thanks
|
Dec 11, 2006 - 10:34 AM |
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
QUOTE(toyotacrazy @ Dec 10, 2006 - 3:20 PM) [snapback]509323[/snapback] I got the swap all put together. It wont start! The ecm has code 12 no NE signal. I did some checks, Any Ideas? Thanks No NE signal? whats NE. mine threw a few codes when i had just dropped it in. Does it crank over at all? give us some more symptomes of what it does when you try to start etc. mine would crank but never fire... ( i had two plugs in the wrong spot on the harness) |
Lo-Fi Version | Time is now: December 2nd, 2024 - 10:38 AM |