3sgte engine in car. now wont start! |
3sgte engine in car. now wont start! |
Dec 9, 2006 - 11:03 AM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
I started my swap last night! Got the engine out and the 3sgte mounted onto the 5s-fe trans. within about 4 hours. The motor mount next to the timing cover had to be modified to fit correctly. Ive heard before its a direct fit for the 5s-fe motor mounts. Its not! Only one bolt lines up without modifications. I took the mount to the grinding wheel and managed to make it fit well. If anybody wants pics give me your e-mail and Ill send you some pics of the mount. Hope this will better prepare some of the future swappers! later-
-toyotacrazy This post has been edited by toyotacrazy: Dec 9, 2006 - 11:06 AM |
Dec 12, 2006 - 1:28 AM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
yeah, its all tied into the fuse box. this was his original problem, but it should be fixed since he wired in the black/orange wire.
code 12 is: 12 - RPM No "G" signal to ECU for 2 sec after crank Starting related, check distributor, starter make sure you plugged in the harness plug to the back of your distributor. then try the new cap and rotor and see where you stand. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: December 2nd, 2024 - 10:56 AM |