SAFCII Dyno-Choon!!!, but I dunno how to read it... Options

[SiKBOY]

I finally got my car on a dyno and the guy tuned my SAFCII. He said that it was running really rich and he was suprised at the gains that my car got after the tune
Can someone try and explain what this chart means?

Also a question to anyone who has an SAFC... I was playing around with it after the tune and in the AIRFLOW section under *REV-*, I cant get the *bouncy ball* going. It just stays flat on the bottom of the graph. I dont know if this is normal or the sensor doesnt work. Can anyone shed some light on this? I just want to make sure that everything is running okay and that I`ve wired it up all good.

Cheers

[GeEkBoY]

you yanks should join the 21st century...

metric is here to stay

one of the sets of lines is your power, the other is your torque. The lower set of lines look to be your power. the upper your torque. since the x axis of the chart is in km/h, You would need to know what gear you are in to figure out the engine rpm (my guess is 2nd gear). It looks like your peak power has increased from about 60 to 80 kw (this is a big gain!!! ). For those of you who are metrically challenged, 1 hp = 745.7 W, so you went from around 80 wheel HP to 107 wheel HP. Hard to believe unless something was screwed up on your car before the tuning.

btw, do you have the 5s-fe or 3S-GE?