3sgte engine in car. now wont start! |
3sgte engine in car. now wont start! |
Dec 9, 2006 - 11:03 AM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
I started my swap last night! Got the engine out and the 3sgte mounted onto the 5s-fe trans. within about 4 hours. The motor mount next to the timing cover had to be modified to fit correctly. Ive heard before its a direct fit for the 5s-fe motor mounts. Its not! Only one bolt lines up without modifications. I took the mount to the grinding wheel and managed to make it fit well. If anybody wants pics give me your e-mail and Ill send you some pics of the mount. Hope this will better prepare some of the future swappers! later-
-toyotacrazy This post has been edited by toyotacrazy: Dec 9, 2006 - 11:06 AM |
Dec 27, 2006 - 9:15 PM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
Ok, I think I got this figured out. Here it goes....
I believe the ecm was just thrown with the swap later and the original ecu was left with the car or something. Because I have a 89661-2B280 ecm. Ive been wiring the car for a 1991 celica all trac. All the connectors and wires for the 1991 match up. Even the ones that I didnt repin for the distributor ect. were correctly corrosponding with the 1991 ewd. So I found an ecm part# 89661-20751. In my little theory I should be able to buy this ecm and plug it right in and be ok. Does this sound right to you? Thanks. Thanks to lagos: JDM 185 ecu's- 89661-20750=89/10-90/03(superceeded to 20751) 89661-20751=90/03-91/08 89661-2b310=91/08-92/02 89661-2b280=91/08-93/09 |
Lo-Fi Version | Time is now: December 3rd, 2024 - 7:34 AM |