3sgte engine in car. now wont start! |
3sgte engine in car. now wont start! |
Dec 9, 2006 - 11:03 AM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
I started my swap last night! Got the engine out and the 3sgte mounted onto the 5s-fe trans. within about 4 hours. The motor mount next to the timing cover had to be modified to fit correctly. Ive heard before its a direct fit for the 5s-fe motor mounts. Its not! Only one bolt lines up without modifications. I took the mount to the grinding wheel and managed to make it fit well. If anybody wants pics give me your e-mail and Ill send you some pics of the mount. Hope this will better prepare some of the future swappers! later-
-toyotacrazy This post has been edited by toyotacrazy: Dec 9, 2006 - 11:06 AM |
Dec 30, 2006 - 10:36 PM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
The vacuum hose goes from the turbo, to the vsv, then from the vsv to this metal pipe that connects to the intake/snorkle tube and to the Idle air control. This metal tube is also where I had a questionable hose that I plugged off so the car would idle. I need to find a diagram. Hope this makes sense.
by the way I dont know how to put these pics on the net, other than using myspace. later |
Lo-Fi Version | Time is now: December 2nd, 2024 - 10:38 AM |