3sgte engine in car. now wont start! |
3sgte engine in car. now wont start! |
Dec 9, 2006 - 11:03 AM |
|
Enthusiast Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) |
I started my swap last night! Got the engine out and the 3sgte mounted onto the 5s-fe trans. within about 4 hours. The motor mount next to the timing cover had to be modified to fit correctly. Ive heard before its a direct fit for the 5s-fe motor mounts. Its not! Only one bolt lines up without modifications. I took the mount to the grinding wheel and managed to make it fit well. If anybody wants pics give me your e-mail and Ill send you some pics of the mount. Hope this will better prepare some of the future swappers! later-
-toyotacrazy This post has been edited by toyotacrazy: Dec 9, 2006 - 11:06 AM |
Dec 30, 2006 - 10:56 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE The vacuum hose goes from the turbo, to the vsv, then from the vsv to this metal pipe that connects to the intake/snorkle tube and to the Idle air control. it sounds like you have this all wrong. from the turbo, go right to the waste gate actuator. from the waste gate actuator, go to the metal pipe that leads to the tvsv. thats it. the hose for your idle should go right to your intake. between the turbos' inlet, and the AFM. you can upload pics to photobucket. then link to them on here. This post has been edited by lagos: Dec 30, 2006 - 10:58 PM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: December 2nd, 2024 - 10:51 AM |