Help with Overboost, hybrid turbo problems Options

[Insanity-74]

Just fitted my hybrid ct26 turbo yesterday..and it overboosts like mad...even with the max boost at .95 bar and the actuator set at 35% it still hits 1.18 bar, but the performance is slugish and uninspiring...any ideas on how to set up the boost controller, or what I can do to control the overboost?????


YEY its 2007

[presure2]

connect a hose direct from your turbo to your wastegate actuator, and cap off the other outlet on the actuator.
if you overboost still, you know its the actuator, or the wastegate itself.
what type of hybrid are you running?

[Insanity-74]

connect a hose direct from your turbo to your wastegate actuator, and cap off the other outlet on the actuator.
if you overboost still, you know its the actuator, or the wastegate itself.
what type of hybrid are you running?

Will give that a shot...I using a ct26 stage 2 hybrid.

This post has been edited by Insanity-74: Jan 1, 2007 - 9:19 AM

[presure2]

connect a hose direct from your turbo to your wastegate actuator, and cap off the other outlet on the actuator.
if you overboost still, you know its the actuator, or the wastegate itself.
what type of hybrid are you running?

Will give that a shot...I using a ct26 stage 2 hybrid.

exactly what does "stage 2" mean?