 how to install spark plugs, and wires |
 Aug 2, 2003 - 7:08 AM
|
 
|
 Enthusiast  Joined Mar 31, '03 From RI Currently Offline Reputation: 0 (0%)  |
i just ordered a set of accel wires with bosch platnium spark plugs, i have never replaced these before, so im not really sure what im doing. any help would be appreciated, thank you.
|
 |
Replies
|
Aug 8, 2003 - 2:01 AM
|
|
|
Enthusiast Joined Aug 31, '02 From KC Currently Offline Reputation: 0 (0%) |
If you do mess with the gap, be VERY careful, they should come pre-gapped,,, I would also recommend a bit of anti-sieze compound on the threads of the new plugs, and change them with the motor cold, they should also be torqued with a torque wrench, do NOT overtighten them. Also study how the wires clip into the dist. cap b4 removing them, they can be tricky til you figure out just how to push to release the retaining clip. other than that, its no problem.
|
Posts in this topic
Celica94GT how to install spark plugs Aug 2, 2003 - 7:08 AM
98celica3 all you do is take the old wires out. try to do th... Aug 2, 2003 - 10:36 AM hioctane remember to ask the person whom you bought the spa... Aug 2, 2003 - 11:27 AM bigwerm you dont have to worry about the gap. The bosch p... Aug 2, 2003 - 1:41 PM Chrobis almost every spark plug comes pre gapped! Aug 2, 2003 - 3:27 PM AJcelica QUOTE (Chrobis @ Aug 2, 2003 - 12:41 PM) almost ev... Aug 3, 2003 - 4:51 AM BlackSTX You can buy a little guage to measure the spark pl... Aug 4, 2003 - 10:04 AM Chrobis just go to autozone, kragens, napa, whatever and t... Aug 4, 2003 - 11:43 AM aznsoccerplaya12 what are accel wires? Aug 6, 2003 - 11:54 AM SleeperCelica where did u order these plugs and wires?
thanks Aug 6, 2003 - 1:47 PM Celica94GT i ordered them from nopionline.com Aug 6, 2003 - 2:44 PM HyperDeathKill I take you don't have a shop manual, get one a... Aug 8, 2003 - 9:45 AM JKG97LTD make sure you use a torque wrench when putting the... Aug 9, 2003 - 1:53 PM
Celica94GT the gap is .044, i installed the plugs and wires... Aug 9, 2003 - 10:12 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 11:09 AM |