My alarm is toast, possibly a fuse? Options

[95CelicaST]

Well a while back I posted saying that I had all my doors open (including hatch) and I accidently hit the button on my alarm thing and it locked the doors, except this time the blinking LED in my dash to show it is armed was a solid red light. and has been ever since. It still would lock the doors and all, so I saw no reason to worry, except now I have found that my alarm does not work at all. I opened the hatch and got something out of it, closed it, and then went to get in and my door was locked. All this time I though my alarm still worked, but now it is only keyless entry. I think a fuse might have blown, but I don't know where that fuse would be, because it was all installed by the previous owner.

Maybe a fuse? or do I need a new alarm?

This post has been edited by 95CelicaST: Jan 22, 2007 - 1:17 PM

[95CelicaST]

95celicast it's sounds like you may be in valet mode.

try the same thing I recomended to chandy1986. open a door and press arm disarm arm. If the light goes from solid red to off the alarm was in valet and now it's not. should work fine.

Still solid red light. Still no alarm.

[AudioFreak]

95celicast it's sounds like you may be in valet mode.

try the same thing I recomended to chandy1986. open a door and press arm disarm arm. If the light goes from solid red to off the alarm was in valet and now it's not. should work fine.

Still solid red light. Still no alarm.

Solid red is valet mode. Do you know if there is a valet switch somewhere in the car? Also you can try pulling the battery for a while and see if the brain will reset. Hopefully you don't have a battery backup.