Calling all 5sfe's!, No spark! |
Calling all 5sfe's!, No spark! |
Jan 26, 2007 - 12:42 AM |
|
Enthusiast Joined Jan 23, '05 From Portage Currently Offline Reputation: 5 (100%) |
Well I am finishing the installation of my freshly rebuilt 5s all the fluids are in and I make the first attempt to start it. It cranks but doesn't fire. I have NO spark. The distributor is freshly rebuilt with the timing set correctly. I checked the ignitor with a voltage meter and it's reading as it should. My big green book says that the next thing would be the crank sensor but a new one is like $90 dollars so needless to say I don't want to go wasting money. I just want to know what you guys think the issue could be. All help is appreciated.
|
Jan 26, 2007 - 11:15 AM |
|
Enthusiast Joined Jan 23, '05 From Portage Currently Offline Reputation: 5 (100%) |
distributor is in correctly and the ignitor is %110 plugged in the efi fuse is also not blown. I'm running out of ideas. the car has about 185000 miles on it so im thinking the crank sensor could be bad. is it correct that the crank sensor is not under power but it sends a signal as the crank turns therefor it wouldn't be getting a reading on the voltage meter?
|
Lo-Fi Version | Time is now: November 29th, 2024 - 12:00 AM |