My fogs quit working, EDIT: all better guys!! Options

[95CelicaST]

Well I hooked up my ST202 fog lights last night finally. I had the wires from my old PIAA fogs still routed down there, so I cut the connectors off the fog lights and the PIAA lines and put on some connectors. I plugged them all in and turned the lights on and they were working fine. I drove all last night and they were still all working fine. I came to work and parked and I could see that they were on because of the reflection off the bumper in front of me, but when I came back out shortly after they were not working. I checked the connections and they look fine. I didn't wrap the connections in electrical tape yet, but the entire connection is incased in plastic and rubber, and it isn't wet.


hmmmm... any thoughts?

This post has been edited by 95CelicaST: Jan 26, 2007 - 7:19 PM

[phonex98]

new fuse, definetly needed! i had one like that a while back. i used one of the spares under the hood.

Thats what I was going to do, except the spares are 10,20,30. The one for the lights is a 25 and it is a little bigger than the others.

Spare fuses under the hood :|. Say what ? Theres spares in there ?