 manual tranny ECU replacing.... |
 Jan 30, 2007 - 2:54 PM
|
 
|
|
Enthusiast  Joined Nov 23, '05 From Charleston, WV Currently Offline Reputation: 1 (100%)  |
Hy guys.
Quik question. I going to replace ECU for manual on my car, because I was running with auto ECU about half year and I was having problems with accelaration. Anyway. I did 't check yet and I think it should not be a problem to change it. Well here is a question. Does manual ECU plugs right in or is there anything what should I know before start swaping. Thanks a lot... |
 |
Replies
|
Jan 30, 2007 - 3:14 PM
|
|
 Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
You'll probably want to compare pinouts on the two ECUs. You can pull the board out of the ECU housing once you take out a few screws and then there might be pinouts printed on the board that you could compare.
My AE101 ECU had pins printed, while my AE111 ECU didn't. -------------------- New Toyota project coming soon...
|
Posts in this topic
miro1975 manual tranny ECU replacing.... Jan 30, 2007 - 2:54 PM
miro1975 I'll try to do that if I will have any problem... Jan 30, 2007 - 3:56 PM
hurley97 I have a swapped manual. my M/T ECU plugged into t... Jan 30, 2007 - 11:04 PM miro1975 That's what I did. I was playing with it and d... Jan 30, 2007 - 11:18 PM Coomer If that's the case, you need pinouts for both ... Jan 30, 2007 - 11:55 PM miro1975 Thank you guys. I just going to rewire the last co... Jan 31, 2007 - 8:13 AM Batman722 you swapped trannys and you're still running y... Jan 31, 2007 - 10:37 AM miro1975 Yes I'm running my a/t ecu and everything is p... Jan 31, 2007 - 11:46 AM Batman722 I know that the A/T ECU does have a lower rev limi... Jan 31, 2007 - 12:54 PM miro1975 Plugs are OK (new). Must be just that A/T rpm lim... Jan 31, 2007 - 6:07 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 9:24 AM |